Dark Light
-5%
,

Original Arduino MKR Wifi 1010 Board ABX00023


  1. Microcontroller: SAMD21 Cortex-M0+ 32-bit low-power ARM MCU
  2. Digital I/O Pins: 8
  3. PWM Pins: 12
  4. Flash Memory: 256 KB
  5. SRAM: 32 KB
  6. Board Power Supply (USB/VIN): 5V

3,499.00 3,669.00

The Arduino MKR WiFi 1010 is the easiest point of entry to basic IoT and pico-network application design. Whether you are looking at building a sensor network connected to your office or home router, or if you want to create a BLE device sending data to a cellphone, the MKR WiFi 1010 is your one-stop-solution for many of the basic IoT application scenarios.

The MKR WIFI 1010 is a significant improvement on the MKR 1000 WIFI. It’s equipped with an ESP32 module made by U-BLOX. This board aims to speed up and simplify the prototyping of WiFi-based IoT applications thanks to the flexibility of the ESP32 module and its low power consumption.

Pinout diagram:

This thin board has been designed to offer a practical and cost-effective solution for makers to design IoT projects with minimal previous experience in networking. It is based on the low power Arm® Cortex®-M0 32-bit SAMD21, which is part of the Arduino MKR family. Wireless devices specifically designed for the Internet of Things (IoT).


Specification:

Microcontroller SAMD21 Cortex®-M0+ 32bit low power ARM MCU (datasheet)
Radio module u-blox NINA-W102 (datasheet)
Board Power Supply 5V (USB/VIN)
Secure Element ATECC508 (datasheet)
Supported Battery Li-Po Single Cell, 3.7V, 1024mAh Minimum
Circuit Operating Voltage 3.3V
Digital I/O Pins 8
PWM Pins 13 (0 .. 8, 10, 12, 18 / A3, 19 / A4)
Interface 1 x UART
1 x SPI
1 x I2C
Analog Input Pins 7 (ADC 8/10/12 bit)
Analog Output Pins 1 (DAC 10 bit)
External Interrupts 8 (0, 1, 4, 5, 6, 7, 8, 16 / A1, 17 / A2)
DC Current per I/O Pin 7 mA
Memory CPU Flash Memory 256 KB (internal)
SRAM 32 KB
EEPROM no
Clock Speed 32.768 kHz (RTC), 48 MHz
LED_BUILTIN 6
Length (mm) 61.5 mm
Width (mm) 25 mm
Weight (gm) 32
Shipping Weight 0.05 kg
Shipping Dimensions 8 × 4 × 2 cm

Features:

  1. Digital I/O Pins: 8
  2. PWM Pins: 12
  3. Flash Memory: 256 KB
  4. SRAM: 32 KB
  5. Microcontroller: SAMD21 Cortex-M0+ 32-bit low-power ARM MCU
  6. Board Power Supply (USB/VIN): 5V
  7. Full-speed USB device and embedded host
  8. Pre-mounted headers with pin-out

Package Includes:

1 x Original Arduino MKR Wifi 1010 Board ABX00023

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Original Arduino MKR Wifi 1010 Board ABX00023”

There are no reviews yet.