The ReadytoSky 80A 2-6S ESC is designed especially for multirotor and quadcopter applications. which, in comparison to other ESCs on the market, offers faster and better motor speed control, improving flying performance.
Fast throttle response and multi-integrated unique program that outperforms all open-source software are features of the ReadytoSky 80A 2-6 ESC. This ESC is compatible with 2-6s Lipo Batteries and its firmware was specifically developed to work with the disc motor through integrated circuitry. Its compatibility is quite good. The MOSFET’s ultra-low resistance allows for a high flow capacity. Performance and stability of the MOSFET special driver integrated circuit greatly outperform those of the driving circuit with built-in discrete components.
Specification:
| Model | Readytosky 80A ESC |
|---|---|
| Burst Current (A) | 100 |
| Constant Current (A) | 80 |
| BEC | Yes (5V/5A) |
| Suitable Lipo Batteries | 2 ~ 6S |
| Throttle signal refresh rate (Hz) | 50 ~ 432 |
| Maximum speed | 210000 2-pole motor rev / min, 6-pole motors 70,000 rev / min, 12 pole motors 35,000 rev / min |
| Color: | Black |
| Lenth(mm) | 93 |
| Width (mm) | 43 |
| Height (mm) | 13 |
| Weight (gm) | 93 |
| Shipping Weight | 0.095 kg |
| Shipping Dimensions | 13 × 9 × 2 cm |
Features:
- Security power function: When the power is turned on, regardless of the throttle stick at any position will not start the motor immediately to prevent personal injury
- Throttle range calibrated function: to adapt the throttle differences between different strokes, improve the linearity of throttle response
- programmed project (available throttle stick or card LED parameter settings):
- Brake setting: No brake / with brake
- Battery Type: Lithium battery / NiMH
- Low Voltage Protection Mode: Soft Shutdown / hard off
- Low Voltage Protection Threshold: low / medium / high
- start mode: Normal / Soft / Super-soft and start
- Timing: low / medium / high
- Restore factory defaults
- Comprehensive protection features:
- Under-voltage protection: the program set by the user when the battery voltage is below the protection threshold, ESC automatically reduces the output power
- Overvoltage Protection: input voltage exceeds the input range are not allowed to start, automatic protection, also issued a hasty “beep” Warning
- Overheat protection: built-in temperature detection circuit that automatically reduces the output power ESC temperature is too high
- Remote signal loss protection: remote control signal is lost for 1 second to reduce the power, and then have two seconds to turn off without the remote control signal output
Package Includes:
1 x Readytosky 80A ESC 2-6S Brushless ESC Speed Controller for RC Drone.
Koptan 50mm x 33m High Temperature Resistant Tape for 3D Printers
Eachine EV800 5 Inches 800×480 FPV Goggles
SmartElex RLS-06 Analog & Digital Line Sensor Array
HSKRC 3 Inch 140mm Carbon Fiber Racing Kit
Creality Ender-3 V2 Neo 3D Printer
2 pairs 2030 3 blades 2 inch Clear Propeller CW&CCW
Pure Carbon Fiber Magnetic Propeller Balancer Prop Essential For Quadcopter FPV Helicopter Airplane
ARF Quadcopter Advanced Combo Kit
Mark4 5 inch 225mm carbon fiber frame kit
ARF Quadcopter Upgraded Combo Kit
NEO-6M GPS Module with EPROM
Koptan 50mm High Temperature Resistance Tape for 3D Printers
Creality Hotbed Control Module
APM 2.8 Basic Flight Controller kit with GPS Module Combo Kit
3D printer 128×64 Smart LCD controller for ramps 1.4
ESP8266 NodeMCU CP2102 Board
ESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino
ESP32 OLED Module for WiFi and Bluetooth 






There are no reviews yet.