SHIELD-EKG-EMG
Available on backorder
- Stackable connectors – up to 6 channels can be stacked and wired to A0-A6 analogue inputs.
- Calibration signal generation by D4/D9 digital output
- Precise trimmer potentiometer for calibration (all boards are shipped completely assembled, tested and calibrated so that you don’t have to do this unless you want to see how things works)
- Input connector for standard or active electrodes.
- Works with both 3.3V and 5V Arduino boards
₹2,709.00 ₹2,909.00
Available on backorder
Introducing the SHIELD-EKG-EMG, an innovative device enabling Arduino-compatible boards to capture Electrocardiography (ECG) and Electromyography (EMG) signals. This shield opens up exciting possibilities for biofeedback experimentation, allowing users to monitor their heartbeat, log pulse data, and explore gesture recognition by analyzing muscle activity, as showcased in this project.
The SHIELD-EKG-EMG functions by converting analog differential signals (the ECG/EMG biopotentials generated by muscles) from its CH1_IN+/CH1_IN- inputs into a consolidated stream of analog output data. To facilitate digital processing, the output signal needs further discretization. This is typically achieved through a dedicated Analog-to-Digital Converter (ADC) embedded in the Microcontroller Unit (MCU) of the baseboard, such as OLIMEXINO-328, OLIMEXINO-32U4, OLIMEXINO-STM32, and others. This integration enhances the capability for advanced digital signal processing and analysis.
Package Includes:
1 x SHIELD-EKG-EMG Module.
Based on 0 reviews
Be the first to review “SHIELD-EKG-EMG”
Related products
-
Development Boards
RP2040 Microcontroller IC by Raspberry PI REEL of 500
- Dual ARM Cortex-M0+ @ 133MHz
- 264kB on-chip SRAM in six independent banks
- Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
- DMA controller
- Fully-connected AHB crossbar
- Interpolator and integer divider peripherals
- On-chip programmable LDO to generate the core voltage
- 2 on-chip PLLs to generate USB and core clocks
- 30 GPIO pins, 4 of which can be used as analog inputs
SKU: n/a -
Development Boards, Official Boards and Hats, RASPBERRY PI
Raspberry Pi 4 Model-B with 4 GB RAM
- 4GB Variants
- Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor
- WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
- LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
- Operating Power 5V@3A via USB Type-C port
- Dual-Display Micro HDMI Ports which supports H 265 Decode for 4K Video @60
SKU: n/a -
Development Boards
Official Raspberry Pi Camera V2
- Fixed focus lens on-board
- Improved resolution – 8-Megapixel native resolution sensor-capable of 3280 x 2464 pixel static images
- Supports 1080p30, 720p60 and 640x480p90 video
- Size 25mm x 23mm x 9mm
- Weight just over 3g
- Connects to the Raspberry Pi board via a short ribbon cable (supplied)
- Camera v2 is supported in the latest version of Raspbian, Raspberry Pi’s preferred operating system
- Uses the Sony IMX219PQ image sensor – high-speed video imaging and high sensitivity
SKU: n/a -
Development Boards
Official Raspberry Pi High Quality Camera- C/CS Mount
- Sony IMX477R stacked, back-illuminated sensor.
- Resolution: 12.3 megapixels.
- Compatible with Raspberry Pi 1/2/3/4 boards
- Output: RAW12/10/8, COMP8
- Back focus: Adjustable (12.5 mm–22.4 mm)
- Lens standards: C-mount, CS-mount (C-CS adapter included)
- IR cut filter: Integrated
SKU: n/a
There are no reviews yet.