SmartElex AT89S52 Development Board with LCD
- Onboard 5V regulator (78M05) circuit.
- On-Board power supply on-off switch
- On-Board DC motor Driver L298P
- On-Board 4×4 Matrix Keypad.
- On-Board 4 bit 16×2 LCD Display.
- 0592MHz crystal.
- Port extensions for all ports with detailed pin labelling for easy identification of pins
- Onboard USB TO Serial – CH340 Chip.
- On-board Micro USB USBASP for loading HEX file.
₹1,717.00 ₹1,817.00
The SmartElex AT89S52 Development Board serves as a tool for assessing and showcasing the capabilities of the AT89S52 microcontroller. Featuring an onboard MCU socket compatible with the 40-pin DIP package of the AT89S52 controller, this board is crafted for versatile general-purpose applications.
Equipped with essential components, the board includes a power supply circuit, Micro USB ports for USBASP programming and CH340G serial communication with a computer and other devices, a power status LED, a reset switch, a buzzer, 8 user LEDs, an L298P DC motor driver, a 4×4 matrix keypad, a 16×2 LCD, and port extensions for all 4 ports. The board can be powered through the DC plug-in jack, with the onboard power regulator accommodating a voltage range from 9 to 15VDC.
Pinouts:
Package Includes:
1 x SmartElex AT89S52 Development Board.
1 x LCD1602 Parallel LCD Display
1 x User Guide
Based on 0 reviews
Be the first to review “SmartElex AT89S52 Development Board with LCD”
Related products
-
Development Boards
7″ Official Raspberry Pi Display with Capacitive Touchscreen
- 10 finger capacitive touch.
- Connects to the Raspberry Pi board using a ribbon cable connected to the DSI port.
- Adapter board is used to power the display and convert the parallel signals from the display to the serial (DSI) port on the Raspberry Pi.
- Will require the latest version of Raspbian OS to operate correctly.
- Display : 19.4 cm (7 inch) Touchscreen
- Screen Dimensions (cm) : 19.4 x 11 x 2
- Screen Resolution (pixels) : 800 x 480
- Touch : 10 finger capacitive
- Kit Weight (gm) : 350
SKU: n/a -
Development Boards
RP2040 Microcontroller IC by Raspberry PI-REEL of 100
- Dual ARM Cortex-M0+ @ 133MHz
- 264kB on-chip SRAM in six independent banks
- Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
- DMA controller
- Fully-connected AHB crossbar
- Interpolator and integer divider peripherals
- On-chip programmable LDO to generate the core voltage
- 2 on-chip PLLs to generate USB and core clocks
- 30 GPIO pins, 4 of which can be used as analog inputs
SKU: n/a -
Development Boards
Official Raspberry Pi Debug Probe
- All-in-one USB-to-serial debug and UART bridge
- Both interfaces use a 3-pin debug connector
- Open-source Raspberry Pi Picoprobe software
- Three different types of debug cables to cover the vast use cases
- plug and play debugging of Raspberry Pi Pico and other microcontrollers- and microprocessor-based platforms.
SKU: n/a -
Development Boards, Official Raspberry PI Kits, RASPBERRY PI
Raspberry Pi 4 Model B 4GB Starter Kit
-20%
Development Boards, Official Raspberry PI Kits, RASPBERRY PIRaspberry Pi 4 Model B 4GB Starter Kit
- Raspberry Pi 4 Model B with 4GB RAM
- USB type-C power supply
- Micro to standard HDMI cable
- Official Raspberry Pi 4 case-red-white.
- Sandisk Micro SD/SDHC 32GB Class 10 Memory Card (Upto 98MB/s Speed)
SKU: n/a
There are no reviews yet.