SP Racing F3 Flight Controller Deluxe

Using a next-generation CPU, the SP Racing F3 Flight Controller Deluxe was created to deliver unmatched I/O capabilities in a compact and incredibly light form factor, together with fantastic flight performance based on tried-and-true sensors.
This flight controller has several fascinating features, such as a faster ARM-Cortex M4 core and a next-generation STM32 F3 CPU with a hardware floating point unit for effective flying calculations. Additionally, it has a high capacity black box flight log recorder that eliminates the need for guesswork and helps you improve your tune. The extra integrated sensors for direction and altitude, together with the barometer placed at the board’s bottom for convenient wind isolation, are some more fantastic features. A dedicated output for programmable LEDs – great for orientation, racing and night flying. The no-compromise I/O supports all the features at the same time.

F3 runs the open-source Cleanflight flight control (FC) software which has an ever-growing community of friendly developers and users. Being open-source it allows you to contribute to the system. Cleanflight comes with a detailed manual that is reviewed and maintained by the Cleanflight developers and community. No more second-hand information.

The F3 Deluxe gives you all the features you need for the heart of your aircraft, whether you’re into FPV racing, acrobatic flying or aerial photography it’s perfect.

Pins and Ports:

1. MicroUSB socket.
2. 4x 4pin JST-SH sockets (I2C, SWD, 2xUART)
3. 2x 8pin JST-SH sockets (PPM, PWM, SERIAL RX, GPIO, ADC, 3V, 5V, GND)
4. 8x 3pin through-holes for pin headers for ESC/Servo connections.
5. 2x 4pin through-holes for pin headers for 2x serial ports.
6. 2x 2pin through-holes for pin headers for battery voltage and buzzer
   

   ---

   Specification:

   Model	SP Racing F3-Deluxe
   Input Voltage (V)	5 VDC
   Firmware	Support KVteam, MWOSD firmware
   Sensors	MPU6050-Accelerometer/Gyro, MS5611 barometer, HMC5883 compass
   Processor	STM32F303 CPU, 72Mhz inc FPU
   Micro-SD Card Slot	No
   Dimensions (mm) LxWxH	36 x 36 x 5 (without shell)
   Weight (gm)	20 with Shell
   Shipping Weight	0.04 kg
   Shipping Dimensions	5 × 3 × 2 cm

   Features:

   1. No compromise I/O. Use all the features all the time; e.g. Connect your OSD + SmartPort + SBus + GPS + LED
   2. Strip + Battery Monitoring + Sonar + 8 motors – all at the same time!
   3.  On-board high-capacity black box flight log recorder – optimize your tuning and see the results of your setup without
   4. guesswork ( Deluxe).
   5. Next-generation STM32 F3 processor with hardware floating point unit for efficient flight calculations and faster
   6. ARM-Cortex M4 core.
   7.  Stackable design – perfect for integrating with OSDs and power distribution boards.
   8. 16 PWM I/O lines for ESCs, Servos and legacy receivers. 8 available on standard pin headers. 8 via side mounted connectors.
   9. Full support for OneShot ESCs for easy PID tuning and a sharper response.
   10. Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required (built-in).
   11. Dedicated output for programmable LEDs – great for orientation, racing and night flying.
   12. Dedicated I2C port for connection of OLED display without needing flight battery.
   13. Battery monitoring ports for voltage and current.
   14. Sonar support for precision low-altitude hold.
   15. Buzzer port for audible warnings and notifications.
   16. Developer friendly debugging port (SWD) and boot mode selection, unbreakable bootloader.
   17. Symmetrical design for a super tidy wiring.
   18.  Wire up using pin headers, JST-SH sockets or solder pads. Use either right-angled or straight pin-headers.
   19. Barometer mounted on the bottom of the board for easy wind isolation.
   20. Loop times up to ~2x as fast as previous-generation STM32F1 based boards.
   21. A configuration of the flight controller via a cross-platform GUI (Windows/OSX/Linux).
   22. Supports a variety of aircraft, tri copters, quadcopters, hexacopters, octocopters, planes and more.
   23. Available in Acro and Deluxe versions.

   ---

   Package Includes:

   1 x SP Racing F3 Flight Controller With Case.
   4 x Connecting Cables.
   6 x Male Jumper Header.