Recommended Products
Display Modules, HMI LCD Display
10.1inch Resistive Touch Screen IPS LCD
10.1inch IPS screen,1024 × 600 high resolution.
Resistive touch control.
Compatible and Direct-connect with any revision of Raspberry Pi (If you are using a Raspberry Pi Zero / Zero 2 W, an additional HDMI cable is required).
Supports Raspberry Pi OS / Ubuntu / Kali and Retropie systems.
Also works as a computer monitor, in this case, the touch panel is unavailable and an HDMI cable is required.
HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os).
OSD menu, supports brightness/contrast ratio adjustable manually.
SKU: n/a
Display Modules, HMI LCD Display
AD409 Pro-ES HDMI Digital Microscope with Endoscope
High-quality metal lens and focusing barrel
Microscope with Endoscope all-around view 360°
Professional HDMI digital microscope supports multiple output methods
Soldering Microscope with Pro Metal Stand
Unique UV filter design
8 Levels Adjustable LED Lights
Convenient Wireless Remote Control
Professional Measurement Software
Easy to use, more than a microscope
SKU: n/a
Development Boards, Robot Chasis
Aluminium Tank Robot Chassis with Dual 12V Motors
Wheels and Tracks are made of plastic
Structure is sturdy and stable, with body made of metal
33mm Motors can operate at 9V to 12V (300 RPM)
Tons of mounting holes & slots!
Size: 185mm X 200mm X 60mm (L X W X H)
SKU: n/a
Development Boards, Robot Chasis
MasterPi AI Vision Chassis with Mecanum Wheels and Robot Arm
Stable power supply assured with an autonomous power switch.
Over-current safeguard for the 6-channel PWM servo ports.
Embedded MCU to lighten the load on the Raspberry Pi and optimize resource consumption.
Equipped with various features like RGB light, buzzer, and LED light.
Expandability facilitated through three IIC ports.
Numerous GPIO pins available for development purposes.
Compatibility with Hiwonder sensors ensured with 4PIN anti-reverse ports.
SKU: n/a
Development Boards, Robot Chasis
ArmPi Pro ROS Robot Chassis with Robot Arm
Independent power switch for stable power supply
6-channel PWM servo ports with over-current protection
Loaded MCU to offload the workload of Raspberry Pi and reduce resource usage
Loaded with RGB light, buzzer, LED light, etc.
Three IIC ports for expansion
Lead out multiple GPIO pins for development
4PIN anti-reverse ports compatible with Hiwonder sensors
SKU: n/a
Development Boards
Official Micro-HDMI (Male) to Standard HDMI (Male) Cable for Raspberry Pi
Completely compliant with Ethernet specification for High-Speed HDMI (Version 1.4).
An outstanding cable that maintains balance and purity while delivering signal with exceptional audio-visual transfer capabilities.
Connectors with nickel plating have the maximum signal transfer rate and corrosion resistance.
A large gauge PVC jacket offers the best protection against temperature extremes and wear and tear.
For the best defense against RF and EM interference, use Mylar foil shielding and reinforced quad-layer braided shielding.
HDMI plug to HDMI plug leads that support 480i, 480p, 720p, 1080i, 1080p, 1440p, and 4K@60p resolution.
Compatible with all previous Raspberry Pi versions and the Raspberry Pi 4 Model B.
SKU: n/a
Shop
Showing 1–24 of 3490 results
-
-
ESC-Drone Speed Controller
DYS XSD20A ESC Solder Version (Original)
- Model: XSD20A Solder version
- Processor: Silabs EFM8BB21
- Battery: 12.6-16.8V (3-4S Lipo)
- Current Rating: 20Amp
- BEC: No (OPTO)
- Signal frequency: 20-500Hz
- Firmware: BLHeli_S (bootloader and firmware)
- Supports: 1-2ms signal, Dshot600/Dshot300
- BLHeli_S does Damped Light only
SKU: n/a -
ESC-Drone Speed Controller
Hobbywing Skywalker- 80A UBEC
1 Output: Continuous 80A, Burst 100A up to 10 seconds.
2 Input Voltage: 3-6S Lipo, 5-18 cells NiMH.
3 BEC: 5A / 5V Switch mode BEC.
4 Refresh rate of the throttle signal: 50Hz to 432Hz.
5 Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.
(BLM = BrushLess Motor)SKU: n/a -
ESC-Drone Speed Controller
One Shot BLHeli_32 35A 32 bit 2-5S ESC
- Input: 2-5S input Maximum input 6S (close brake)
- 32bit architecture
- Telemetry capability (voltage, current, temperature, speed)
- All inputs and outputs are protected against overvoltage (~30V) and under voltage (~-30V). 3,3 and 5V capable
- Supports all common Dshot commands like Turtle Mode, 3D mode and change of rotation
- Overcurrent protection (measures the current and reduces it to max. 40A)
SKU: n/a -
ESC-Drone Speed Controller
Hobbywing Skywalker-60A- UBEC
1 Output: Continuous 60A, Burst 80A up to 10 seconds.
2 Input Voltage: 3-6S Lipo, 5-18 cells NiMH.
3 BEC: 5A / 5V Switch mode BEC.
4 Refresh rate of the throttle signal: 50Hz to 432Hz.
5 Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.
(BLM = BrushLess Motor)
6 Size: 77mm*35mm*14mm.
7 Weight: 63gSKU: n/a -
-
-
