Recommended Products
Display Modules, HMI LCD Display
10.1inch Resistive Touch Screen IPS LCD
10.1inch IPS screen,1024 × 600 high resolution.
Resistive touch control.
Compatible and Direct-connect with any revision of Raspberry Pi (If you are using a Raspberry Pi Zero / Zero 2 W, an additional HDMI cable is required).
Supports Raspberry Pi OS / Ubuntu / Kali and Retropie systems.
Also works as a computer monitor, in this case, the touch panel is unavailable and an HDMI cable is required.
HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os).
OSD menu, supports brightness/contrast ratio adjustable manually.
SKU: n/a
Display Modules, HMI LCD Display
AD409 Pro-ES HDMI Digital Microscope with Endoscope
High-quality metal lens and focusing barrel
Microscope with Endoscope all-around view 360°
Professional HDMI digital microscope supports multiple output methods
Soldering Microscope with Pro Metal Stand
Unique UV filter design
8 Levels Adjustable LED Lights
Convenient Wireless Remote Control
Professional Measurement Software
Easy to use, more than a microscope
SKU: n/a
Development Boards, Robot Chasis
Aluminium Tank Robot Chassis with Dual 12V Motors
Wheels and Tracks are made of plastic
Structure is sturdy and stable, with body made of metal
33mm Motors can operate at 9V to 12V (300 RPM)
Tons of mounting holes & slots!
Size: 185mm X 200mm X 60mm (L X W X H)
SKU: n/a
Development Boards, Robot Chasis
MasterPi AI Vision Chassis with Mecanum Wheels and Robot Arm
Stable power supply assured with an autonomous power switch.
Over-current safeguard for the 6-channel PWM servo ports.
Embedded MCU to lighten the load on the Raspberry Pi and optimize resource consumption.
Equipped with various features like RGB light, buzzer, and LED light.
Expandability facilitated through three IIC ports.
Numerous GPIO pins available for development purposes.
Compatibility with Hiwonder sensors ensured with 4PIN anti-reverse ports.
SKU: n/a
Development Boards, Robot Chasis
ArmPi Pro ROS Robot Chassis with Robot Arm
Independent power switch for stable power supply
6-channel PWM servo ports with over-current protection
Loaded MCU to offload the workload of Raspberry Pi and reduce resource usage
Loaded with RGB light, buzzer, LED light, etc.
Three IIC ports for expansion
Lead out multiple GPIO pins for development
4PIN anti-reverse ports compatible with Hiwonder sensors
SKU: n/a
Development Boards
Official Micro-HDMI (Male) to Standard HDMI (Male) Cable for Raspberry Pi
Completely compliant with Ethernet specification for High-Speed HDMI (Version 1.4).
An outstanding cable that maintains balance and purity while delivering signal with exceptional audio-visual transfer capabilities.
Connectors with nickel plating have the maximum signal transfer rate and corrosion resistance.
A large gauge PVC jacket offers the best protection against temperature extremes and wear and tear.
For the best defense against RF and EM interference, use Mylar foil shielding and reinforced quad-layer braided shielding.
HDMI plug to HDMI plug leads that support 480i, 480p, 720p, 1080i, 1080p, 1440p, and 4K@60p resolution.
Compatible with all previous Raspberry Pi versions and the Raspberry Pi 4 Model B.
SKU: n/a
Shop
Showing 2665–2688 of 3490 results
-
Brushed / Brushless DC motor Driver, Motors
Cytron SmartDriveDuo-60 MDDS60 60A (100A peak)
-
Input Voltage (Motor): 10 – 45VDC
- Maximum current up to 100A peak (1 second), 60A continuously, each channel.
-
Two manual/test buttons for each channel.
-
Two output indicator LEDs for each channel.
-
Suitable for combat or sumo robot.
- Battery Low Voltage Monitoring Mode
- DC Brush motor Driver, not for brushless motor
- Dual Channels, it can drive two brush motor independently, or mixed.
- Version: Rev 1.10
SKU: n/a -
-
Motors, Stepper Motor Drivers
3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap Prusa Model
-21%
Motors, Stepper Motor Drivers3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap Prusa Model
- Supply Voltage: 12V
- Standard interfaces (as that of the extruder)
- Reserved GCI like I2C and RS232
- 3 MOSFET’s are applied to the heater/ fan and thermistor circuit.
- Another 5A added to protect the component parts.
- An 11A fuse is added to the hotbed.
- Support 5 stepper drive board
SKU: n/a -
Motors, Stepper Motor Drivers
MACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver and USB cable
-18%
Motors, Stepper Motor DriversMACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver and USB cable
- Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.
- USB power supply and peripherals power phase are separate to protect computer security.
- All the signals are to-isolate which can protect your computer security.
- 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc.
- Wide input voltage range: 12-24V, and with anti-reverse function.
- One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
SKU: n/a -
-
Motors, Stepper Motor Drivers
TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis
-15%
Motors, Stepper Motor DriversTB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis
- Input Current: 0~5A
- Output Current: 0.5~4.0A
- Control Signal: 3.3~24V
- Power (MAX): 160W
- Micro Step: 1, 2/A, 2/B, 4, 8, 16, 32
- Temperature: -10～45℃
- H bridge bipolar constant current drive.
SKU: n/a -
Motors, Stepper Motor Drivers
TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
-14%
Motors, Stepper Motor DriversTB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
- Driver Chip: TB6560AHQ
- Operating Voltage: 10-35V
- Nominal Voltage: 24V
- With the large heat sink to ensure good heat dissipation
- 6N137 high-speed OptoCoupler, to ensure a high speed without step out.
SKU: n/a -
Motors, Stepper Motor Drivers
TB6600 Stepper Motor Driver Controller 8~50V 4.5A
- Supply Voltage: 8V – 50V DC (36V recommended).
- Output current: 0.3A – 4.5A (peak value of 5A).
- Micro Step: 1, 2, 8, 16.
- Maximum PWM frequency: 200kHz.
- Adjustments for the maximum current of the LED: 1A, 2.2A, 3.3A, 4.5A.
- Operating temperature: -10 to + 45 ° С.
SKU: n/a -
Motors, Stepper Motor Drivers
Cytron 3Amp 4V-16V Dual Channel DC Motor Driver MDD3A
- Bidirectional control for two brushed DC motor.
- Control one unipolar/bipolar stepper motor.
- Operating Voltage: DC 4V to 16V
- Maximum Motor Current: 3A continuous, 5A peak
- Buck-boost regulator to produce 5V output (200mA max).
- Buttons for quick testing.
SKU: n/a -
Motors, Stepper Motor Drivers
Cytron 20Amp 6V-30V DC Motor Driver MD20A
- Bidirectional control for one brushed DC motor.
- Operating Voltage: DC 6V to 30V
- Maximum Motor Current: 20A continuous, 60A peak
- Buttons for quick testing.
- LEDs for motor output state.
- Overcurrent protection with active current limiting.
- Temperature protection.
- Undervoltage shutdown.
SKU: n/a -
Motors, Stepper Motor Drivers
Leadshine DM542 Digital Stepper Motor Driver
- Good high-speed performance
- Supply voltage up to +50VDC
- Output current up to 4.2A
- Pulse frequency up to 300 KHz
- Automatic idle-current reduction
- 3-state current control technology
- Self-adjustment technology
- Pure-sinusoidal current control technology
SKU: n/a -
Generic Mini Pumps, Motors
550 Diaphragm Pump 12V Water Pump for Water Spray Fish Tank Reflux Pump
-15%
Generic Mini Pumps, Motors550 Diaphragm Pump 12V Water Pump for Water Spray Fish Tank Reflux Pump
- Watering configuration: much the same, additional sprinklers and timers are required
- 12V DC reflux diaphragm pump 550, the price is the price of a pump, without other accessories
- Maximum pressure: 0.48MP.
- Voltage: 12V, current: at least 2A, measured 1A is not able to bring
- Suction: 3 meters or so, preferably 2 meters (no problem if the vertical height is 1.5 meters).
- Head: 4-5 meters (head is not shot)
- Highest temperature resistance 55°
- Flow rate: 3.5L/min
SKU: n/a -
Generic Mini Pumps, Motors
15L High Flow 555 Vacuum Pump, Air Pump, Oxygen Pump, Fish Tank Folding
-13%
Generic Mini Pumps, Motors15L High Flow 555 Vacuum Pump, Air Pump, Oxygen Pump, Fish Tank Folding
- Operating voltage: 12 VDC
- Rated current: 800mA
- Inflation time: <6 seconds (from 0 to 300 mmHg in a 1000CC closed container)
- Minimum pressure: >400 mmHg (53.33KPa)
- Maximum pressure: 750.062mmHg (100KPa)
- Hermeticity: <5mmHg (from 1000mmHg in 1000CC container min), airtight only for inflation
- Flow rate: >15 L/Min
- Noise: <55dB (test at 30cm distance)
- Lifetime: 100,000 cycles tested
SKU: n/a -
Generic Mini Pumps, Motors
Automatic Aquarium Adjustable Fish Feeding 1/2 Times Daily Food Dispenser Fish Feeder
-9%
Generic Mini Pumps, MotorsAutomatic Aquarium Adjustable Fish Feeding 1/2 Times Daily Food Dispenser Fish Feeder
- New and high quality and Easy to install on edge of fish Pot.
- Dry, loose flake and pellet food can be used
- Ideal for various sizes of aquariums with two options of placing the food feeder on aquarium,
- Free-standing or rim-mounted
- Digital timer for setting up regular feeding programs
SKU: n/a -
-
-
-
-
-
