Recommended Products
Display Modules, HMI LCD Display
10.1inch Resistive Touch Screen IPS LCD
10.1inch IPS screen,1024 × 600 high resolution.
Resistive touch control.
Compatible and Direct-connect with any revision of Raspberry Pi (If you are using a Raspberry Pi Zero / Zero 2 W, an additional HDMI cable is required).
Supports Raspberry Pi OS / Ubuntu / Kali and Retropie systems.
Also works as a computer monitor, in this case, the touch panel is unavailable and an HDMI cable is required.
HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os).
OSD menu, supports brightness/contrast ratio adjustable manually.
SKU: n/a
Display Modules, HMI LCD Display
AD409 Pro-ES HDMI Digital Microscope with Endoscope
High-quality metal lens and focusing barrel
Microscope with Endoscope all-around view 360°
Professional HDMI digital microscope supports multiple output methods
Soldering Microscope with Pro Metal Stand
Unique UV filter design
8 Levels Adjustable LED Lights
Convenient Wireless Remote Control
Professional Measurement Software
Easy to use, more than a microscope
SKU: n/a
Development Boards, Robot Chasis
Aluminium Tank Robot Chassis with Dual 12V Motors
Wheels and Tracks are made of plastic
Structure is sturdy and stable, with body made of metal
33mm Motors can operate at 9V to 12V (300 RPM)
Tons of mounting holes & slots!
Size: 185mm X 200mm X 60mm (L X W X H)
SKU: n/a
Development Boards, Robot Chasis
MasterPi AI Vision Chassis with Mecanum Wheels and Robot Arm
Stable power supply assured with an autonomous power switch.
Over-current safeguard for the 6-channel PWM servo ports.
Embedded MCU to lighten the load on the Raspberry Pi and optimize resource consumption.
Equipped with various features like RGB light, buzzer, and LED light.
Expandability facilitated through three IIC ports.
Numerous GPIO pins available for development purposes.
Compatibility with Hiwonder sensors ensured with 4PIN anti-reverse ports.
SKU: n/a
Development Boards, Robot Chasis
ArmPi Pro ROS Robot Chassis with Robot Arm
Independent power switch for stable power supply
6-channel PWM servo ports with over-current protection
Loaded MCU to offload the workload of Raspberry Pi and reduce resource usage
Loaded with RGB light, buzzer, LED light, etc.
Three IIC ports for expansion
Lead out multiple GPIO pins for development
4PIN anti-reverse ports compatible with Hiwonder sensors
SKU: n/a
Development Boards
Official Micro-HDMI (Male) to Standard HDMI (Male) Cable for Raspberry Pi
Completely compliant with Ethernet specification for High-Speed HDMI (Version 1.4).
An outstanding cable that maintains balance and purity while delivering signal with exceptional audio-visual transfer capabilities.
Connectors with nickel plating have the maximum signal transfer rate and corrosion resistance.
A large gauge PVC jacket offers the best protection against temperature extremes and wear and tear.
For the best defense against RF and EM interference, use Mylar foil shielding and reinforced quad-layer braided shielding.
HDMI plug to HDMI plug leads that support 480i, 480p, 720p, 1080i, 1080p, 1440p, and 4K@60p resolution.
Compatible with all previous Raspberry Pi versions and the Raspberry Pi 4 Model B.
SKU: n/a
Shop
Showing 25–48 of 3476 results
-
-
-
-
-
3D Printer, 3D Printer Nozzle
0.1-1.0mm Mixed 3D Printer Nozzle Cleaning Drill Bit Kit for MK7 MK8RepRap 10Pcs
-17%
3D Printer, 3D Printer Nozzle0.1-1.0mm Mixed 3D Printer Nozzle Cleaning Drill Bit Kit for MK7 MK8RepRap 10Pcs
- Total Length: 38mm
- Shank Diameter: 3.17mm
- Size: 0.1mm to 1mm (Approx.)
- These nozzle drill cleaners are powerful tools that any 3D printer owner must have.
- As blocks happen a lot during the printing, nozzles must be cleaned to ensure flowing printing.
SKU: n/a -
-
IoT & Wireless, IR and RF Transmitters and Receivers
2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
-9%
IoT & Wireless, IR and RF Transmitters and Receivers2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
- Voltage: 3-3.6V (recommended 3.3V) V.
- Maximum output power: +20dBm.
- Power-down mode current: 4.2uA.
- Operating Range: 1Km
- Antenna Gain (peak): 2Dbi.
- 2MB rate (Open area): 520m.
- 1MB rate (Open area): 750m.
- 250Kb rate (Open area): 1100m.
- It uses 2.4GHz global open ISM band, with license free.
- SPI interface facilitates the communication with MCU I/O port.
SKU: n/a -
IoT & Wireless, IoT Development Boards
Waveshare ESP32-S3 Microcontroller, 2.4 GHz Wi-Fi Development Board, dual-core processor with frequency up to 240 MHz
-10%
IoT & Wireless, IoT Development BoardsWaveshare ESP32-S3 Microcontroller, 2.4 GHz Wi-Fi Development Board, dual-core processor with frequency up to 240 MHz
- Adopts ESP32-S3R2 as the main chip.
- Comes with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz.
- Integrated 512KB SRAM, 384KB ROM, 2MB PSRAM, 16MB Flash memory.
- Type-C connector, easier to use.
SKU: n/a -
RASPBERRY PI, Raspberry Pi Accessories
HDMI Male to VGA Female Adapter with 3.5mm AUX and USB to MicroUSB Power Cables
-18%
RASPBERRY PI, Raspberry Pi AccessoriesHDMI Male to VGA Female Adapter with 3.5mm AUX and USB to MicroUSB Power Cables
- Easy to use: Install in seconds, no need of setting.
- Conversion: It can convert complete HDMI into VGA video
- Supports 165MHz/1.65Gbps per channel (6.75Gbps all channel) bandwidth for HDMI input
- Supports Analogue Video output up to UXGA and 1080P with 10-bit DAC
SKU: n/a -
-
Mechanical and Workbench, Robot Wheels
EasyMech 100mm Modified Heavy Duty(HD) Disc Wheels Gray – 4Pcs
-8%
Mechanical and Workbench, Robot WheelsEasyMech 100mm Modified Heavy Duty(HD) Disc Wheels Gray – 4Pcs
- 100% branded Robotic wheels.
- It has 6 holes for attaching it with couplings like HUB or ANTI-SLIP.
- Each wheel is tested for loads up to 20kg.
- It comes with Silicon rubber grip for excellent traction.
- Internal Diameter(ID): 11 mm
- Load Capacity: 20 kg/wheel
- Tyre Grip Material: Silicon Rubber.
- Wheel Body Material: ABS + 20% Glass Fiber.
SKU: n/a -
IoT & Wireless, IoT Development Boards
Realtek AMB82-Mini IoT AI Camera Arduino Dev. Board
- 8-in-1 SoC featuring embedded AI & NPU, High resolution up to 2K
- Fast boot-up in milliseconds; ultra-low power in microampere
- Supporting battery-powered, AI & IoT Ecosystems
- Multiple streams real-time H.265/H.264/JPEG encoding
- SDK supports free RTOS, IAR, GCC, Arduino IDE
SKU: n/a -
Drone Parts, Flight Controller & Accessories
F3 EVO V2.0 Flight Control
- Supported Receiver Input Signal: PPM, SBUS, DSM
- Support PPM, SBUS, DSM receiver input signal
- Battery voltage detection and buzzer interface
- Large current NMOS transistors, operating current can reach 10A or higher
- Use STM32F303CCT6 + MPU6500, advanced hardware platform F3 for higher flight stability
SKU: n/a -
Drone Parts, Flight Controller & Accessories
DJI NAZA-M Lite V1.1 with GPS Kit
- Supported Multi-Rotor: Quad-rotor I4, X4 / Hex-rotor I6, X6, IY6, Y6.
- Supported ESC Output: 400Hz refresh frequency.
- Recommended Transmitter: PCM or 2.4GHz with minimum 4 channels.
- Power Consumption: MAX1. 5W (0.3A@5V) Normal:0.6W (0.12A@5V).
- Weight: MC:25g; VU:20g; GPS:21.3g.
- All-in-One Design.
- Advanced attitude stabilized Algorithm.
- Multiple flight control mode/intelligent switching.
- GPS Module Available/Accurate Position hold.
- Intelligent Orientation Control (IOC).
- Failsafe mode.
SKU: n/a
