Recommended Products
Display Modules, HMI LCD Display
10.1inch Resistive Touch Screen IPS LCD
10.1inch IPS screen,1024 × 600 high resolution.
Resistive touch control.
Compatible and Direct-connect with any revision of Raspberry Pi (If you are using a Raspberry Pi Zero / Zero 2 W, an additional HDMI cable is required).
Supports Raspberry Pi OS / Ubuntu / Kali and Retropie systems.
Also works as a computer monitor, in this case, the touch panel is unavailable and an HDMI cable is required.
HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os).
OSD menu, supports brightness/contrast ratio adjustable manually.
SKU: n/a
Display Modules, HMI LCD Display
AD409 Pro-ES HDMI Digital Microscope with Endoscope
High-quality metal lens and focusing barrel
Microscope with Endoscope all-around view 360°
Professional HDMI digital microscope supports multiple output methods
Soldering Microscope with Pro Metal Stand
Unique UV filter design
8 Levels Adjustable LED Lights
Convenient Wireless Remote Control
Professional Measurement Software
Easy to use, more than a microscope
SKU: n/a
Development Boards, Robot Chasis
Aluminium Tank Robot Chassis with Dual 12V Motors
Wheels and Tracks are made of plastic
Structure is sturdy and stable, with body made of metal
33mm Motors can operate at 9V to 12V (300 RPM)
Tons of mounting holes & slots!
Size: 185mm X 200mm X 60mm (L X W X H)
SKU: n/a
Development Boards, Robot Chasis
MasterPi AI Vision Chassis with Mecanum Wheels and Robot Arm
Stable power supply assured with an autonomous power switch.
Over-current safeguard for the 6-channel PWM servo ports.
Embedded MCU to lighten the load on the Raspberry Pi and optimize resource consumption.
Equipped with various features like RGB light, buzzer, and LED light.
Expandability facilitated through three IIC ports.
Numerous GPIO pins available for development purposes.
Compatibility with Hiwonder sensors ensured with 4PIN anti-reverse ports.
SKU: n/a
Development Boards, Robot Chasis
ArmPi Pro ROS Robot Chassis with Robot Arm
Independent power switch for stable power supply
6-channel PWM servo ports with over-current protection
Loaded MCU to offload the workload of Raspberry Pi and reduce resource usage
Loaded with RGB light, buzzer, LED light, etc.
Three IIC ports for expansion
Lead out multiple GPIO pins for development
4PIN anti-reverse ports compatible with Hiwonder sensors
SKU: n/a
Development Boards
Official Micro-HDMI (Male) to Standard HDMI (Male) Cable for Raspberry Pi
Completely compliant with Ethernet specification for High-Speed HDMI (Version 1.4).
An outstanding cable that maintains balance and purity while delivering signal with exceptional audio-visual transfer capabilities.
Connectors with nickel plating have the maximum signal transfer rate and corrosion resistance.
A large gauge PVC jacket offers the best protection against temperature extremes and wear and tear.
For the best defense against RF and EM interference, use Mylar foil shielding and reinforced quad-layer braided shielding.
HDMI plug to HDMI plug leads that support 480i, 480p, 720p, 1080i, 1080p, 1440p, and 4K@60p resolution.
Compatible with all previous Raspberry Pi versions and the Raspberry Pi 4 Model B.
SKU: n/a
Shop
Showing 505–528 of 3490 results
-
Battery Chargers and Accessories
5V Step-Up Power Module Lithium Battery Charging Protection Board USB For DIY Charger 134N3P
-24%
Battery Chargers and Accessories5V Step-Up Power Module Lithium Battery Charging Protection Board USB For DIY Charger 134N3P
- BAT Discharging Stop Voltage:2.9V
- Discharging Efficiency:85%(input 3.7V output 5V/1A)
- Charging and discharging indication
- Internally installed charging and discharging power MOS
- Preset 4.2V charging voltage, precision ±1%
- Max 8uA standby current
- Integration charging management and discharging management
- Intelligent temperature control and overtemperature protection
- Integration output overvoltage protection, short circuit protection, overload protection
SKU: n/a -
Battery Chargers and Accessories
TP4056/TC4056 1A Li-Ion Lithium Battery Charging Module – Micro B USB
-34%
Battery Chargers and AccessoriesTP4056/TC4056 1A Li-Ion Lithium Battery Charging Module – Micro B USB
- Input voltage : 4.5V ~ 5.5V.
- Input Interface: Micro USB port.
- Charging method: linear charge.
- A full charge voltage: 4.2V.
- Power: 4.2 w.
- Charging accuracy: 1.5%.
- Operating Temperature: -10 to +85ºC
- Charging indicator: LED indicators for charging and full charging.
SKU: n/a -
Battery Chargers and Accessories
TP4056 1A Li-ion lithium Battery Charging Module With Current Protection – Type C
-31%
Battery Chargers and AccessoriesTP4056 1A Li-ion lithium Battery Charging Module With Current Protection – Type C
- Input interface: Type C
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
SKU: n/a -
Battery Chargers and Accessories
TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection
-34%
Battery Chargers and AccessoriesTP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection
- Dimension: 25 x 19 x 10 (LxWxH)mm.
- Input interface: micro USB.
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
SKU: n/a -
Battery Chargers and Accessories
Daly Lifepo4 8S 24V 100A Battery Management System
- Charge voltage:29.2 V
- Charge current:50 A
- Continuous discharge current: 100 A
- Balance Detect Voltage:3.525 V
- State of charge calculations.
- Cell over-voltage and under-voltage protection.
- Intelligent battery balancing (passive).
SKU: n/a -
Battery Chargers and Accessories
6S 40A 18650 Lithium Battery Protection Board
- Maximum discharge current: 40A
- Instantaneous discharge current: 70A
- Charging voltage: 25.5V
- Maximum charging current: 40A
- Overcharge detection voltage: 4.25±0.025V
- Overcharge protection delay: 1.0±0.5S
- Overcharge release voltage: 4.15±0.05V
- Battery balance detection voltage: 4.125±0.025V
- Battery balance release voltage: 4.125±0.05V
- Battery balance current: 41±5mA
- Working current: ≤40uA
SKU: n/a -
-
Battery Chargers and Accessories
5S 15A 18650 Li-ion Lithium Battery BMS Charger Protection Board for 18V 21V Battery
-24%
Battery Chargers and Accessories5S 15A 18650 Li-ion Lithium Battery BMS Charger Protection Board for 18V 21V Battery
- Charging voltage: 21V
- Charging current: 56 A
- Continuous discharge current: 15 A
- Over current protection: 50/55/60 A
- Over current protection delay: 20/25/30 mS
- Single section power consumption since: 30uA
- Single section discharge detection voltage: 2.75-2.85V
- Over discharge recovery voltage: 2.90-3.20V
SKU: n/a -
-
Battery Chargers and Accessories
4 Series 30A 18650 Lithium Battery Protection Board 14.8V 16V with Cable
-25%
Battery Chargers and Accessories4 Series 30A 18650 Lithium Battery Protection Board 14.8V 16V with Cable
4 Series 30A 18650 Lithium Battery Protection Board 14.8V 16V with Cable, a Balance Board for Drill Motor Lipo Cell Module comes with recovery function-AUTO Recovery and Integrated 10 low load resistance MOS tube.
SKU: n/a -
Battery Chargers and Accessories
4S High Current up to 30A Lithium Battery Protection Board Four Series of 14.8V 16.8V
-29%
Battery Chargers and Accessories4S High Current up to 30A Lithium Battery Protection Board Four Series of 14.8V 16.8V
- Overcharge detection voltage: 4.25 ± 0.025V
- Overcharge release voltage: 4.15 ± 0.05V
- Over-discharge detection voltage: 2.50 ± 0.08V
- Over-discharge termination voltage: 3 ± 0.1V
- Overcurrent: 20-30A
- Working current: 15A
SKU: n/a -
Battery Chargers and Accessories
4S 10A 18650 Lithium Battery Protection Board
- Model; HX-4S-A10
- This protection board is suitable for 4 series Li-ion cell.
- Adopt a precision integrated circuit for fast and safe charging.
- Support overcharge protection, over-discharge protection, and short circuit protection.
SKU: n/a -
Battery Chargers and Accessories
4 Series 40A 18650 Lithium Battery Protection Board 14.8V 16.8V with Balance for Drill Motor Lipo Cell Module
-29%
Battery Chargers and Accessories4 Series 40A 18650 Lithium Battery Protection Board 14.8V 16.8V with Balance for Drill Motor Lipo Cell Module
- The Successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 cannot start the drill!!)
- Strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.
SKU: n/a -
-
-
-
Battery Chargers and Accessories
3 Series 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module
-26%
Battery Chargers and Accessories3 Series 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module
- 3S 11.1V 12.6V 40A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery)
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery)
- Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
- Continuous charge current (upper limit): 20A
SKU: n/a -
Battery Chargers and Accessories
3 Series 20A 18650 Lithium Battery Protection Board 11.1V 12V 12.6V
-48%
Battery Chargers and Accessories3 Series 20A 18650 Lithium Battery Protection Board 11.1V 12V 12.6V
- 3S 11.1V 12.6V 20A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery).
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery).
- Continuous discharge current (upper limit): 20A (if the cooling environment is not good, please reduce the load current use).
- Continuous charge current (upper limit): 20A.
- Suitable for the drills with starting current below 80A, power below 135W
SKU: n/a -
Battery Chargers and Accessories
3S 11.1V 10A 18650 Lithium Battery Overcharge And Over-current Protection board-Good Quality
-47%
Battery Chargers and Accessories3S 11.1V 10A 18650 Lithium Battery Overcharge And Over-current Protection board-Good Quality
- Three series of lithium battery protection board.
- Automatically cancel protection after protection conditions restore.
- Suitable for lithium battery pack of 11.1V, 12V, 12.6V.
- Quiescent current < 30uA, so power consumption is small.
- With the function of overcharge protection, over discharge protection, short circuit protection, over-current protection.
SKU: n/a
