Recommended Products
AI Roboo Advanced Robotics Kit – Multi-Function
AI Roboo Advanced Robotics Kit – Multi-Function
A versatile robotics kit designed for building multi-function robots.
Includes sensors, actuators, and controllers for advanced robotics learning.
Ideal for students, hobbyists, and developers exploring autonomous systems.
Supports various robotics projects like obstacle avoidance, line following, and automation.
Perfect for hands-on STEM education and innovative prototype development.
AI Roboo Medical Kit (Healthcare Sensors)
AI Roboo Medical Kit (Healthcare Sensors)
ESP32 microcontroller with Wi-Fi & Bluetooth
Heart rate & oximeter, ECG, EMG, GSR, IR temperature, CO2, BP-ready sensors
RGB LED, buzzer, and potentiometer for interactive control
Hands-on learning for students, hobbyists, and medical tech enthusiasts
Expandable for custom healthcare IoT projects
AI Roboo Lite Kit – Multi-Sensor
AI Roboo Lite Kit – Multi-Sensor
Multi-microcontroller: ESP32 & Raspberry Pi Pico
RGB LED, push buttons, relays, buzzer, seven-segment & OLED display
Sensors: Accelerometer, Temp & Humidity, Barometric Pressure, Ultrasonic, Gas, Touch, LDR, IR, Air Quality
Beginner-friendly for hands-on IoT learning
Expandable via GPIO pins
AI Roboo Experience Kit – Multi-Controller
AI Roboo Experience Kit – Multi-Controller
Complete starter kit for building IoT projects
Includes sensors, connectivity modules, and development tools
Enables fast prototyping and testing of smart devices
Ideal for students, hobbyists, and professionals
Easy to use with support for popular IoT platforms with AI Roboo Kit.
Combo of Raspberry Pi 4 Model-B with 1 GB RAM + Micro-HDMI Cable + Micro-USB to C type Converter
Combo of Raspberry Pi 4 Model-B with 1 GB RAM + Micro-HDMI Cable + Micro-USB to C type Converter
1. To complement the new upgrade on the Pi, consider acquiring two additional accessories:
– Micro-HDMI cable
– Micro-USB to Type-C converter
2. We have conveniently bundled these essential products to meet the requirements of the upgraded hardware in the Raspberry Pi 4. Obtain everything you need in one comprehensive package to kickstart your journey with the latest Raspberry Pi 4 Model B.
Shop
Showing 625–648 of 1350 resultsSorted by popularity
-
Educational Robotics
UNO Smart Robot Car Kit V 3.0. Intelligent and Educational Kit for Kids
- Uno Smart Robot Car is an educational kit for beginners to get hands-on experience about Arduino programming, electronics assembling and robotics knowledge.
- It is an integration solution for robotics learning and made for Arduino education.
- Complete Package Contains 24 kinds of module parts including obstacle avoidance, line tracing module, infrared remote control and Bluetooth 2.0 with EDR via phone and tablets of Android system, etc.
- The kit also has step by step Coloured pictorial user manual and CD from which any beginner can assemble the kit easily
SKU: n/a -
Smart Vision Cameras
OpenMV Cam M7 Smart Vision Camera
- microSD card socket capable of 100Mbs read or write
- SPI bus runs up to 54Mbs allowing easy stream image data
- 12-bit ADC and 12-bit DAC
- RGB LED and two high power 850nm IR LEDs
- OV7725 image sensor capable of 640 x 480 8-bit grayscale or 320 x 240 16-bit RGB565 images at 30 FPS
- OpenMV camera comes with a 2.8mm lens on a standard M12 lens mount
- STM32F765VI Arm® Cortex® M7 processor runs at 216MHz with 512KB of RAM and 2MB of flash.
SKU: n/a -
Smart Vision Cameras
Pixy 2.1 Smart Vision Sensor-Object Tracking Camera
- Processor: NXP LPC4330, 204 MHz, dual core
- Image sensor: Aptina MT9M114, 1296×976 resolution with integrated image flow processor
- Lens field-of-view: 80 degrees horizontal, 40 degrees vertical
- Power consumption: 140 mA typical
- Power input: USB input (5V) or unregulated input (6V to 10V)
- RAM: 264K bytes
- Flash: 2M bytes
SKU: n/a -
Arducam Cameras
Arducam 1080P Day & Night Vision USB Camera Module, 2MP Automatic IR-Cut Switching All-Day Image USB2.0 Webcam with IR LEDs
-16%
Arducam CamerasArducam 1080P Day & Night Vision USB Camera Module, 2MP Automatic IR-Cut Switching All-Day Image USB2.0 Webcam with IR LEDs
- Sensor: 1/2.7” OV2710
- Day/Night Vision: IR-CUT Filter switched in and out automatically based on light condition
- HD Resolution: This camera adopts a 2MP OV2710 sensor for sharp image, Max. resolution: 1920*1080
- High Frame Rates: MJPG 30fps@1080P; YUY2 30fps@640x 480; High-speed USB 2.0 interface.
SKU: n/a -
Current and Voltage Sensor
CJMCU-219 INA219 I2C Interface No Drift Bi-directional Current / Power Supply Monitoring Module
-32%
Current and Voltage SensorCJMCU-219 INA219 I2C Interface No Drift Bi-directional Current / Power Supply Monitoring Module
- 0.1 ohm 1% 2W current sense resistor
- Up to +26V target voltage
- Up to ±3.2A current measurement, with ±0.8mA resolution
- Senses Bus Voltages from 0 to 26 V
- 2C- or SMBus-compatible interface. The
- Reports Current, Voltage, and Power.
SKU: n/a -
Current and Voltage Sensor
20A Range Current Sensor Module ACS712
- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- Small footprint, low-profile SOIC8 package
- 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: 20A
- Sensitivity: 100mV/A
SKU: n/a -
Current and Voltage Sensor
5A 12V Overcurrent Protection AC Current Detection Sensor Module
LC 5A Over-current protection Sensor module uses a current transformer to collect the AC signal to achieve the relay over-current signal output within 0-5A. Relay pull while over-current, relay released while not over-current
SKU: n/a -
Current and Voltage Sensor
SCT-013-030 Non-invasive AC Current Sensor Clamp Sensor 30A
- Input Current : 0-30A
- Output Mode: 0-1V @ 30mA
- Frequency: 50HZ-150KHZ
- Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W)
- Output Plug 3.5mm
- Dielectric Strength 6000V AC/1min
- Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement, and protection
- Meet UL94-V0 flame retardant properties
SKU: n/a -
-
Biometric/ECG/EMG Sensor
Anti Static ESD Wrist Strap Elastic Band with Clip for Sensitive Electronics Repair Work Tool
-58%
Biometric/ECG/EMG SensorAnti Static ESD Wrist Strap Elastic Band with Clip for Sensitive Electronics Repair Work Tool
- Adjustable wrist strap with alligator clip tip.
- Inner conducting layer made of stainless shell filaments.
- Durable Polyurethane-Coated Coil Cords.
- High-Quality Strain relief.
- The soft elastic band comfort.
- Rinsing Resisting.
SKU: n/a -
Biometric/ECG/EMG Sensor
ECG GEL ELECTRODE (3M) Pack of 5
- Good electrical characteristics
- Different base materials, sizes, and connections
- Monitoring electrode with foam tape and radiolucent stud.
- ECG Electrode with convenient abrader.
- ECG Electrode for monitoring applications requiring high adhesion.
- Adhesive foam tape backing and proprietary sticky gel ensure excellent skin contact.
- Remains fresh for 30 days out of the bag.
SKU: n/a -
Biometric/ECG/EMG Sensor
Heart Beat Pulse Sensor Amped
- A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required.
- The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything.
- Visualization software (made in Processing) to instantly see the output of the sensor and for troubleshooting.
SKU: n/a -
-
-
-
-
-
![SHARP IR Distance Measuring Sensor Unit 4 ~ 30 cm With Cable-[GP2Y0A41SK0F]](https://airoboo.in/wp-content/uploads/2024/05/f-3-300x300.jpg)
