Recommended Products
Display Modules, HMI LCD Display
10.1inch Resistive Touch Screen IPS LCD
10.1inch IPS screen,1024 × 600 high resolution.
Resistive touch control.
Compatible and Direct-connect with any revision of Raspberry Pi (If you are using a Raspberry Pi Zero / Zero 2 W, an additional HDMI cable is required).
Supports Raspberry Pi OS / Ubuntu / Kali and Retropie systems.
Also works as a computer monitor, in this case, the touch panel is unavailable and an HDMI cable is required.
HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os).
OSD menu, supports brightness/contrast ratio adjustable manually.
SKU: n/a
Display Modules, HMI LCD Display
AD409 Pro-ES HDMI Digital Microscope with Endoscope
High-quality metal lens and focusing barrel
Microscope with Endoscope all-around view 360°
Professional HDMI digital microscope supports multiple output methods
Soldering Microscope with Pro Metal Stand
Unique UV filter design
8 Levels Adjustable LED Lights
Convenient Wireless Remote Control
Professional Measurement Software
Easy to use, more than a microscope
SKU: n/a
Development Boards, Robot Chasis
Aluminium Tank Robot Chassis with Dual 12V Motors
Wheels and Tracks are made of plastic
Structure is sturdy and stable, with body made of metal
33mm Motors can operate at 9V to 12V (300 RPM)
Tons of mounting holes & slots!
Size: 185mm X 200mm X 60mm (L X W X H)
SKU: n/a
Development Boards, Robot Chasis
MasterPi AI Vision Chassis with Mecanum Wheels and Robot Arm
Stable power supply assured with an autonomous power switch.
Over-current safeguard for the 6-channel PWM servo ports.
Embedded MCU to lighten the load on the Raspberry Pi and optimize resource consumption.
Equipped with various features like RGB light, buzzer, and LED light.
Expandability facilitated through three IIC ports.
Numerous GPIO pins available for development purposes.
Compatibility with Hiwonder sensors ensured with 4PIN anti-reverse ports.
SKU: n/a
Development Boards, Robot Chasis
ArmPi Pro ROS Robot Chassis with Robot Arm
Independent power switch for stable power supply
6-channel PWM servo ports with over-current protection
Loaded MCU to offload the workload of Raspberry Pi and reduce resource usage
Loaded with RGB light, buzzer, LED light, etc.
Three IIC ports for expansion
Lead out multiple GPIO pins for development
4PIN anti-reverse ports compatible with Hiwonder sensors
SKU: n/a
Development Boards
Official Micro-HDMI (Male) to Standard HDMI (Male) Cable for Raspberry Pi
Completely compliant with Ethernet specification for High-Speed HDMI (Version 1.4).
An outstanding cable that maintains balance and purity while delivering signal with exceptional audio-visual transfer capabilities.
Connectors with nickel plating have the maximum signal transfer rate and corrosion resistance.
A large gauge PVC jacket offers the best protection against temperature extremes and wear and tear.
For the best defense against RF and EM interference, use Mylar foil shielding and reinforced quad-layer braided shielding.
HDMI plug to HDMI plug leads that support 480i, 480p, 720p, 1080i, 1080p, 1440p, and 4K@60p resolution.
Compatible with all previous Raspberry Pi versions and the Raspberry Pi 4 Model B.
SKU: n/a
Shop
Showing 1585–1608 of 3490 results
-
Buck Converter
XL4015 5A Step Down Adjustable Power Supply with LED Voltmeter
- Better than 2596, easy to 4A 50W, up to 75W adding the heat sink.
- Over-temperature protection: Yes (shutdown output automatically after over temperature).
- Input voltage: 4V ~ 38V (not more than 38V).
- Output voltage: 1.25V ~ 36V (adjustable).
- Output current: 0A ~ 5A (recommended below 4.5A).
SKU: n/a -
Buck Converter
4A DC-DC Step-down Adjustable Constant Voltage Module
1. High-power LED driver.
2. Lithium battery(or lead accumulator) charge.
3. Vehicle-mounted power supply.
4. Low voltage system power supply.
5. 6V, 12V, 14V, 24V battery charge.
6. On-board laptop power supply.
7. Regulated power supply.
8.Low voltage power supply systemSKU: n/a -
-
USB Interface Module
SIYI Ethernet to HDMI Converter OSD Overlay MP4 Recording IP Configuration Compatible with SIYI HM30 Ground Unit ZR10 Optical Pod ZT30 Four-Sensor Optical Pod
-17%
USB Interface ModuleSIYI Ethernet to HDMI Converter OSD Overlay MP4 Recording IP Configuration Compatible with SIYI HM30 Ground Unit ZR10 Optical Pod ZT30 Four-Sensor Optical Pod
- Type: SIYI Ethernet to HDMI Converter
- Brand: SIYI
- Model: Ethernet to HDMI Converter
- Use: SIYI Ethernet to HDMI Converter
SKU: n/a -
USB Interface Module
MAX485 TTL To RS485
- On-board MAX485 chip, A low power consumption for the RS-485 communication, slew-rate limited transceiver.
- A low power consumption for the RS-485 communication
- Onboard then 5.08 (mm) pitch 2P terminal to facilitate RS-485 communication wiring.
- Slew-rate limited transceiver
- All pins of the chip have been lead to can be controlled through the microcontroller.
- Convenient RS-485 communication wiring
- Multiple Units can be connected to the same RS-485 bus wiring.
- All Chip pins are brought out for proper controls
SKU: n/a -
USB Interface Module
3.3V Adapter Board for 24L01 Wireless Module
- It can be used with NRF24L01 wireless module
- Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
- Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
- Allows for easy connection to nRF24L01+ modules
- Small power on SMD LED indicator
SKU: n/a -
USB Interface Module
SD Card Reading Writing Module for Arduino
- All SD SPI pins output, MOSI, SCK, MISO, and CS.
- Support 5V/3.3V input.
- This module can handle 2GB SD cards.
- Size:4.7 x 3.1 cm.
- LED indicator.
- SD Card Holder.
- Onboard 3.3V regulator (AMS1117-3.3) for +5v to 3.3V generation. 3.3V is also available as output.
SKU: n/a -
USB Interface Module
IIC/I2C Serial Interface Adapter Module
- 5V power supply.
- Serial I2C control of LCD display using PCF8574.
- Backlight can be enabled or disabled via a jumper on the board.
- Contrast control via a potentiometer.
- Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
SKU: n/a -
-
USB Interface Module
PL2303 PL2303HX USB To TTL(Serial) Converter Module – 5 Pin
- Adopt imported controller PL2303HX, which can stabilize the flash with high speed
- 500mA self-recovery fuse for protection
- Two data transmission indicator can monitor data transfer status in real time
- Reserve 3.3V and 5V pin interface, easy for the DDWRT of different voltage system that needs power
- The entire board is coated by the high quality transparent heat-shrinkable sleeve, making the PCB in insulation state from outside,
- so that the board won’t be burnt down by material shortcut.
- Electrostatic package ensures the board will not be damaged before use
SKU: n/a -
USB Interface Module
IIC/I2C Serial Interface Adapter Module (Made In India)
- 5V power supply.
- Serial I2C control of LCD display using PCF8574.
- Backlight can be enabled or disabled via a jumper on the board.
- Contrast control via a potentiometer.
- Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
SKU: n/a -
USB Interface Module
CH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output, easy to connect to your MCU.
- Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
- The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
- Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit system)
SKU: n/a -
USB Interface Module
DB9 Female Screw Terminal to RS232 RS485 Conversion Board
- Brings all 9 pins of a DB9 connector to screw terminal blocks
- Adapter used for communication debug
- 9 pcs signal line was all lead out, name and number clearly labeled;
- All-copper DR9 seat, anti-oxidation, better contact;
- Military board, three anti-paint sprays an entire board, corrosion-resistant;
- Terminal spacing 3.96MM, screw hole diameter 2MM, need to use a width of 2MM screwdriver for assembly;
- Use of environmentally friendly copper terminals, through IS0-9001.
SKU: n/a -
USB Interface Module
USB to UART/ESP8266 Adapter Programmer for ESP-01 WiFi Modules with CH340G Chip
-25%
USB Interface ModuleUSB to UART/ESP8266 Adapter Programmer for ESP-01 WiFi Modules with CH340G Chip
- Driver Chip: CH340G
- Supports all basic windows versions.
- The adapter plate integrated 1000μF solid capacitors to ensure the current supply
- The power supply will not be a problem to make WIFI module crashes unresponsive.
- Using 3225 SMD crystal oscillator, improve the stability of serial work, on a beautiful and tall.
- Working voltage: 4.5V – 5.5V (Onboard 3.3v LDO Regulator)
- Working current: 300mA (LDO regulator can supply)
SKU: n/a -
USB Interface Module
USB to RS485 Converter Adapter Support WIN7 XP Vista Linux Mac OS
- Fully compliant USB 2.0 standard, backward compatible with USB1.1
- Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
- Baud Rate Range: 75bps – 115200bps, up to 6Mbps
- Supports Plug, Play and hot-swap ( USB side)
- Better than using CH341D chip or similar chip to support the laptop USB port.
- Communication distance up to 1.2KM
SKU: n/a -
USB Interface Module
PL2303 TA Download Cable USB to TTL RS232 Module USB to Serial
- Built-in TTL COM PC-PL2303HX Chip.
- Standard USB type and TTL 4 pin connector
- Simple and Easy way to give USB support to your designs
- Available for Linux, Mac, WinCE, and Windows (XP, 7), Win 8
- Cable Length: 1M
- Net Weight: 30gm
SKU: n/a -
USB Interface Module
CH340G USB to RS232 TTL Auto Converter Adapter Module for Arduino14 f
- Resettable fuse with 500mA
- 3.3V / 5V real switchable
- 3.3V comes with the transformer
- Green Data reception mentioning an indicator
- Multifunction CTS access products
- Dual protection circuit
- Full-function pins 5P
- Blue power indicator
SKU: n/a -
