Recommended Products
Display Modules, HMI LCD Display
10.1inch Resistive Touch Screen IPS LCD
10.1inch IPS screen,1024 × 600 high resolution.
Resistive touch control.
Compatible and Direct-connect with any revision of Raspberry Pi (If you are using a Raspberry Pi Zero / Zero 2 W, an additional HDMI cable is required).
Supports Raspberry Pi OS / Ubuntu / Kali and Retropie systems.
Also works as a computer monitor, in this case, the touch panel is unavailable and an HDMI cable is required.
HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os).
OSD menu, supports brightness/contrast ratio adjustable manually.
SKU: n/a
Display Modules, HMI LCD Display
AD409 Pro-ES HDMI Digital Microscope with Endoscope
High-quality metal lens and focusing barrel
Microscope with Endoscope all-around view 360°
Professional HDMI digital microscope supports multiple output methods
Soldering Microscope with Pro Metal Stand
Unique UV filter design
8 Levels Adjustable LED Lights
Convenient Wireless Remote Control
Professional Measurement Software
Easy to use, more than a microscope
SKU: n/a
Development Boards, Robot Chasis
Aluminium Tank Robot Chassis with Dual 12V Motors
Wheels and Tracks are made of plastic
Structure is sturdy and stable, with body made of metal
33mm Motors can operate at 9V to 12V (300 RPM)
Tons of mounting holes & slots!
Size: 185mm X 200mm X 60mm (L X W X H)
SKU: n/a
Development Boards, Robot Chasis
MasterPi AI Vision Chassis with Mecanum Wheels and Robot Arm
Stable power supply assured with an autonomous power switch.
Over-current safeguard for the 6-channel PWM servo ports.
Embedded MCU to lighten the load on the Raspberry Pi and optimize resource consumption.
Equipped with various features like RGB light, buzzer, and LED light.
Expandability facilitated through three IIC ports.
Numerous GPIO pins available for development purposes.
Compatibility with Hiwonder sensors ensured with 4PIN anti-reverse ports.
SKU: n/a
Development Boards, Robot Chasis
ArmPi Pro ROS Robot Chassis with Robot Arm
Independent power switch for stable power supply
6-channel PWM servo ports with over-current protection
Loaded MCU to offload the workload of Raspberry Pi and reduce resource usage
Loaded with RGB light, buzzer, LED light, etc.
Three IIC ports for expansion
Lead out multiple GPIO pins for development
4PIN anti-reverse ports compatible with Hiwonder sensors
SKU: n/a
Development Boards
Official Micro-HDMI (Male) to Standard HDMI (Male) Cable for Raspberry Pi
Completely compliant with Ethernet specification for High-Speed HDMI (Version 1.4).
An outstanding cable that maintains balance and purity while delivering signal with exceptional audio-visual transfer capabilities.
Connectors with nickel plating have the maximum signal transfer rate and corrosion resistance.
A large gauge PVC jacket offers the best protection against temperature extremes and wear and tear.
For the best defense against RF and EM interference, use Mylar foil shielding and reinforced quad-layer braided shielding.
HDMI plug to HDMI plug leads that support 480i, 480p, 720p, 1080i, 1080p, 1440p, and 4K@60p resolution.
Compatible with all previous Raspberry Pi versions and the Raspberry Pi 4 Model B.
SKU: n/a
Shop
Showing 2113–2136 of 3490 results
-
Drone Parts, FPV Antennas and Trans-Receivers
TS835 Fpv 5.8G 600Mw 48Ch (2-6S) Wireless Av Transmitter
-22%
Drone Parts, FPV Antennas and Trans-ReceiversTS835 Fpv 5.8G 600Mw 48Ch (2-6S) Wireless Av Transmitter
- No. of Channels: 48CH
- Antenna Gain: 2db
- Frequency: 5.8G
- Video Format: NTSC / PAL Auto
- 48 CH compatible with all FPV 5.8g receivers.
- 5.8G 600mW 40 Channels AV wireless FPV transmitter
- Super small 200mA current for 600mW wireless transmitter power.
- 600mW transmitter power assure 5KM distance in open area,
SKU: n/a -
-
Drone Parts, FPV Antennas and Trans-Receivers
RC832 Plus 5.8G 48CH Wireless AV Receiver
- Operating Voltage: 12VDC
- Working current: 200mA max.
- Video format: NTSC/PAL auto.
- Control Range: Approx 5 KM
- 48 channels: Cover A, B, E, F, H bands and L bands.
- Power off memory for last channel and band.
- Dual Independent video and audio signal outputs.
SKU: n/a -
-
-
Drone Parts, FPV Antennas and Trans-Receivers
915Mhz 100mW Mini Telemetry Kit
- Very small size & Lightweight
- MAVLink protocol framing and status reporting
- Interchangeable air and ground modules
- Micro-USB port
- UART interface
- Error correction corrects up to 25% of bit errors
- Configurable through Mission Planner and APM Planner
- The demonstrated range of several kilometers with a small Omni antennac
SKU: n/a -
Drone Parts, FPV Antennas and Trans-Receivers
433Mhz 100mW Radio Telemetry Kit
- Available in 433Mhz
- Air data rates up to 250kbps
- The range is approx 1 mile (1.6 Km)
- MAVLink protocol framing and status reporting
- Frequency hopping spread spectrum (FHSS)
- Adaptive time division multiplexing (TDM)
- Support for LBT and AFA
- Micro-USB port
- Adaptive flow control when used with APM
- Based on the HopeRF HM-TRP radio module, featuring a SiLabs Si1000 RF microcontroller.
SKU: n/a -
Drone Parts, FPV Antennas and Trans-Receivers
3DR Single TTL MINI Radio Telemetry 433MHz 500mW for PIXHAWK and APM FC
-10%
Drone Parts, FPV Antennas and Trans-Receivers3DR Single TTL MINI Radio Telemetry 433MHz 500mW for PIXHAWK and APM FC
- A range of several Kilometers with a small Omni Antenna
- Can be used with a bi-directional amplifier for even more more range
- Open Source Firmware
- At command for radio configuration
- RT Commands for Remote radio Configuration
- Adaptive flow control when used with APM
- Based on the Hope RF HM-TRP radio Module
- Featuring a SiLabs Si1000 RF Microcontroller
- Support OTG of Android Cellphone and Computer
SKU: n/a -
Drone Parts, FPV Antennas and Trans-Receivers
915Mhz 500MW Telemetry Kit
1. Connectivity: The set links your flight controller to a computer, laptop, or tablet via USB or UART.
2. V2 Radios: No separate Air/Ground module needed; supports both UART and USB connections.
3. Live Data: Displays GPS position, system voltage, heading, etc., in real-time.
4. Joystick Control: Allows aircraft control via a computer using open-source MAVLink-based ground station software.
6. Affordability: Budget-friendly kit with longer range and superior performance.
7. Frequency Band: Operates on the 915MHz band.
8. Full-Duplex Link: Utilizes Hoper’s HM-TRP modules with custom open-source firmware.
SKU: n/a -
-
-
-
Drone Parts, Drone Propellers
Pure Carbon Fiber Magnetic Propeller Balancer Prop Essential For Quadcopter FPV Helicopter Airplane
-9%
Drone Parts, Drone PropellersPure Carbon Fiber Magnetic Propeller Balancer Prop Essential For Quadcopter FPV Helicopter Airplane
- Tapered propeller holder, automatically aligns the propeller to shaft center.
- Magnetic suspension, the none-pressure mounting solution of the balancer shaft ensures the maximum sensitivity and accuracy.
- High Sensitivity Propeller Balancer
- Suitable for any size and 80 grams or less Multi-rotor propeller
- It is made from Carbon Fiber and Metal materials.
SKU: n/a -
-
