Recommended Products
Display Modules, HMI LCD Display
10.1inch Resistive Touch Screen IPS LCD
10.1inch IPS screen,1024 × 600 high resolution.
Resistive touch control.
Compatible and Direct-connect with any revision of Raspberry Pi (If you are using a Raspberry Pi Zero / Zero 2 W, an additional HDMI cable is required).
Supports Raspberry Pi OS / Ubuntu / Kali and Retropie systems.
Also works as a computer monitor, in this case, the touch panel is unavailable and an HDMI cable is required.
HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os).
OSD menu, supports brightness/contrast ratio adjustable manually.
SKU: n/a
Display Modules, HMI LCD Display
AD409 Pro-ES HDMI Digital Microscope with Endoscope
High-quality metal lens and focusing barrel
Microscope with Endoscope all-around view 360°
Professional HDMI digital microscope supports multiple output methods
Soldering Microscope with Pro Metal Stand
Unique UV filter design
8 Levels Adjustable LED Lights
Convenient Wireless Remote Control
Professional Measurement Software
Easy to use, more than a microscope
SKU: n/a
Development Boards, Robot Chasis
Aluminium Tank Robot Chassis with Dual 12V Motors
Wheels and Tracks are made of plastic
Structure is sturdy and stable, with body made of metal
33mm Motors can operate at 9V to 12V (300 RPM)
Tons of mounting holes & slots!
Size: 185mm X 200mm X 60mm (L X W X H)
SKU: n/a
Development Boards, Robot Chasis
MasterPi AI Vision Chassis with Mecanum Wheels and Robot Arm
Stable power supply assured with an autonomous power switch.
Over-current safeguard for the 6-channel PWM servo ports.
Embedded MCU to lighten the load on the Raspberry Pi and optimize resource consumption.
Equipped with various features like RGB light, buzzer, and LED light.
Expandability facilitated through three IIC ports.
Numerous GPIO pins available for development purposes.
Compatibility with Hiwonder sensors ensured with 4PIN anti-reverse ports.
SKU: n/a
Development Boards, Robot Chasis
ArmPi Pro ROS Robot Chassis with Robot Arm
Independent power switch for stable power supply
6-channel PWM servo ports with over-current protection
Loaded MCU to offload the workload of Raspberry Pi and reduce resource usage
Loaded with RGB light, buzzer, LED light, etc.
Three IIC ports for expansion
Lead out multiple GPIO pins for development
4PIN anti-reverse ports compatible with Hiwonder sensors
SKU: n/a
Development Boards
Official Micro-HDMI (Male) to Standard HDMI (Male) Cable for Raspberry Pi
Completely compliant with Ethernet specification for High-Speed HDMI (Version 1.4).
An outstanding cable that maintains balance and purity while delivering signal with exceptional audio-visual transfer capabilities.
Connectors with nickel plating have the maximum signal transfer rate and corrosion resistance.
A large gauge PVC jacket offers the best protection against temperature extremes and wear and tear.
For the best defense against RF and EM interference, use Mylar foil shielding and reinforced quad-layer braided shielding.
HDMI plug to HDMI plug leads that support 480i, 480p, 720p, 1080i, 1080p, 1440p, and 4K@60p resolution.
Compatible with all previous Raspberry Pi versions and the Raspberry Pi 4 Model B.
SKU: n/a
Shop
Showing 2137–2160 of 3476 resultsSorted by popularity
-
Drone Parts, FPV Antennas and Trans-Receivers
3DR Single TTL MINI Radio Telemetry 433MHz 500mW for PIXHAWK and APM FC
-10%
Drone Parts, FPV Antennas and Trans-Receivers3DR Single TTL MINI Radio Telemetry 433MHz 500mW for PIXHAWK and APM FC
- A range of several Kilometers with a small Omni Antenna
- Can be used with a bi-directional amplifier for even more more range
- Open Source Firmware
- At command for radio configuration
- RT Commands for Remote radio Configuration
- Adaptive flow control when used with APM
- Based on the Hope RF HM-TRP radio Module
- Featuring a SiLabs Si1000 RF Microcontroller
- Support OTG of Android Cellphone and Computer
SKU: n/a -
Drone Parts, FPV Antennas and Trans-Receivers
915Mhz 500MW Telemetry Kit
1. Connectivity: The set links your flight controller to a computer, laptop, or tablet via USB or UART.
2. V2 Radios: No separate Air/Ground module needed; supports both UART and USB connections.
3. Live Data: Displays GPS position, system voltage, heading, etc., in real-time.
4. Joystick Control: Allows aircraft control via a computer using open-source MAVLink-based ground station software.
6. Affordability: Budget-friendly kit with longer range and superior performance.
7. Frequency Band: Operates on the 915MHz band.
8. Full-Duplex Link: Utilizes Hoper’s HM-TRP modules with custom open-source firmware.
SKU: n/a -
-
-
-
Drone Parts, Drone Propellers
Pure Carbon Fiber Magnetic Propeller Balancer Prop Essential For Quadcopter FPV Helicopter Airplane
-9%
Drone Parts, Drone PropellersPure Carbon Fiber Magnetic Propeller Balancer Prop Essential For Quadcopter FPV Helicopter Airplane
- Tapered propeller holder, automatically aligns the propeller to shaft center.
- Magnetic suspension, the none-pressure mounting solution of the balancer shaft ensures the maximum sensitivity and accuracy.
- High Sensitivity Propeller Balancer
- Suitable for any size and 80 grams or less Multi-rotor propeller
- It is made from Carbon Fiber and Metal materials.
SKU: n/a -
-
-
Drone Parts, Drone Propellers
Tarot TL100D04 Efficient Folding Propeller(CW+CCW)
1. Compatible with various disk-type multi-copter motors
2. Gives a 10% efficiency boost.
3. Has higher strength than original DJI’s.
4. More convenient to install and disassemble than that of DJI’s.
5. Convenient to transport so as to protect the propellers.SKU: n/a -
-
Drone Accessories, Drone Parts
Alarm Finder Tracer Buzzer for RC Lost Aircraft
- Operating Voltage : 4 – 6 V.
- Current Drain : 1 – 35 mA.
- Weight : 4.5 gm.
- Let you know where your RC aircraft is when you lose connection with it
- Particularly useful when the multirotor is out of control
- Easy to install, simply connect the alarm between the servo and the receiver
SKU: n/a
