Recommended Products
Display Modules, HMI LCD Display
10.1inch Resistive Touch Screen IPS LCD
10.1inch IPS screen,1024 × 600 high resolution.
Resistive touch control.
Compatible and Direct-connect with any revision of Raspberry Pi (If you are using a Raspberry Pi Zero / Zero 2 W, an additional HDMI cable is required).
Supports Raspberry Pi OS / Ubuntu / Kali and Retropie systems.
Also works as a computer monitor, in this case, the touch panel is unavailable and an HDMI cable is required.
HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os).
OSD menu, supports brightness/contrast ratio adjustable manually.
SKU: n/a
Display Modules, HMI LCD Display
AD409 Pro-ES HDMI Digital Microscope with Endoscope
High-quality metal lens and focusing barrel
Microscope with Endoscope all-around view 360°
Professional HDMI digital microscope supports multiple output methods
Soldering Microscope with Pro Metal Stand
Unique UV filter design
8 Levels Adjustable LED Lights
Convenient Wireless Remote Control
Professional Measurement Software
Easy to use, more than a microscope
SKU: n/a
Development Boards, Robot Chasis
Aluminium Tank Robot Chassis with Dual 12V Motors
Wheels and Tracks are made of plastic
Structure is sturdy and stable, with body made of metal
33mm Motors can operate at 9V to 12V (300 RPM)
Tons of mounting holes & slots!
Size: 185mm X 200mm X 60mm (L X W X H)
SKU: n/a
Development Boards, Robot Chasis
MasterPi AI Vision Chassis with Mecanum Wheels and Robot Arm
Stable power supply assured with an autonomous power switch.
Over-current safeguard for the 6-channel PWM servo ports.
Embedded MCU to lighten the load on the Raspberry Pi and optimize resource consumption.
Equipped with various features like RGB light, buzzer, and LED light.
Expandability facilitated through three IIC ports.
Numerous GPIO pins available for development purposes.
Compatibility with Hiwonder sensors ensured with 4PIN anti-reverse ports.
SKU: n/a
Development Boards, Robot Chasis
ArmPi Pro ROS Robot Chassis with Robot Arm
Independent power switch for stable power supply
6-channel PWM servo ports with over-current protection
Loaded MCU to offload the workload of Raspberry Pi and reduce resource usage
Loaded with RGB light, buzzer, LED light, etc.
Three IIC ports for expansion
Lead out multiple GPIO pins for development
4PIN anti-reverse ports compatible with Hiwonder sensors
SKU: n/a
Development Boards
Official Micro-HDMI (Male) to Standard HDMI (Male) Cable for Raspberry Pi
Completely compliant with Ethernet specification for High-Speed HDMI (Version 1.4).
An outstanding cable that maintains balance and purity while delivering signal with exceptional audio-visual transfer capabilities.
Connectors with nickel plating have the maximum signal transfer rate and corrosion resistance.
A large gauge PVC jacket offers the best protection against temperature extremes and wear and tear.
For the best defense against RF and EM interference, use Mylar foil shielding and reinforced quad-layer braided shielding.
HDMI plug to HDMI plug leads that support 480i, 480p, 720p, 1080i, 1080p, 1440p, and 4K@60p resolution.
Compatible with all previous Raspberry Pi versions and the Raspberry Pi 4 Model B.
SKU: n/a
Shop
Showing 2353–2376 of 3490 results
-
Development Boards, Shield for Arduino
L293D Motor Driver/Servo Shield for Arduino
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
SKU: n/a -
Development Boards, Shield for Arduino
NANO IO Shield Expansion Board For Arduino Screw Terminals
-16%
Development Boards, Shield for ArduinoNANO IO Shield Expansion Board For Arduino Screw Terminals
- Compatible with Arduino NANO
- All digital and analog pins breakout
- Compact size.
- Leads all pins out, convenient for wiring and doing experiments.
- Dimensions: 53 x 36 x 12 (LxWxH) mm.
- Weight: 22 gm.
SKU: n/a -
Development Boards, Shield for Arduino
XBee Shield V03 Module Wireless Control
- Stackable design, easy to plug into the ARDUINO development board.
- Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.
- 3.3v and 5v dual power output.
- 3.3v and 5v IO compatible.
- USB2.0 protocol.
SKU: n/a -
-
-
Development Boards, Shield for Arduino
Proto Screw Shield 1.0 For Arduino Uno
- Arduino terminal to provide the IO, port connection.
- 3.81 posts quality, reliable, convenient, durable.
- Combined with the Proto Shield, the middle can be used as a prototype expansion board.
- Double-sided PCB Prototyping extended area vias connecting the front sides can be welded components.
- The middle section can be placed small bread plate, convenient test extend
SKU: n/a -
Development Boards, Shield for Arduino
VS1053 MP3 Recording Module Development Board with Onboard Recording Function
-16%
Development Boards, Shield for ArduinoVS1053 MP3 Recording Module Development Board with Onboard Recording Function
- SPI interface, the control signal lines are led out
- A headphone and stereo output
- Onboard Microphone for recording
- A line-in input interface
- Separate 3.5 mm Jack for MIC and Speaker
- Onboard Power Indicator
- 3.3V and 2.8V of LDO chip AMS-1117 on board provides up to 800mA current
SKU: n/a -
Development Boards, Shield for Arduino
Cytron G15 Shield
-
Arduino reset button
-
4 x G15 Cube Servo ports.
-
External power port for a servo with polarity protection
-
Stackable I/O header pin
-
Selectable digital pins for the control pin with mini jumpers
-
TX and RX indicator LEDs to show communication activities, only on Rev2.0.
-
Selectable Serial pins, Either hardware serial or software serial via mini jumpers, only on Rev2.0
SKU: n/a -
-
Development Boards, Shield for Arduino
ADK USB Host Shield compatible with Arduino
- Works with standard (dual 5/3.3V) and 3.3V-only (for example, Pro Arduino) boards.
- Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host)
- Supports HID devices, such as keyboards, mice, joysticks, etc.
- Compatible with Mass storage devices, such as USB sticks, memory card readers, external hard drives (FAT32 Type File System – Mega Arduino only).
SKU: n/a -
Development Boards, Shield for Arduino
SeeedStudio Grove Beginner Kit for Arduino
- Operating voltage: 5 V
- Tutorials for guidance
- Fully compatible with Arduino UNO
- High performance, low power 8 bit ATmega328 MU microcontroller
- Serial converter CP2102N chip (to communicate the Seeeduino with a computer by using a micro-USB cable)
- 2 on-board Grove connectors
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog inputs
- ISP header
- Arduino UNO-R3 shield compatible
- Micro USB programming and power supply
- Supports Windows, Mac OS, and Linux
SKU: n/a -
Development Boards, Shield for Arduino
SHIELD-EKG-EMG
- Stackable connectors – up to 6 channels can be stacked and wired to A0-A6 analogue inputs.
- Calibration signal generation by D4/D9 digital output
- Precise trimmer potentiometer for calibration (all boards are shipped completely assembled, tested and calibrated so that you don’t have to do this unless you want to see how things works)
- Input connector for standard or active electrodes.
- Works with both 3.3V and 5V Arduino boards
SKU: n/a -
Development Boards, Kits compatible with Arduino
Uno Learning kit for Arduino
- All-in-one kit, a great starter kit for learning coding.
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
Development Boards, Kits compatible with Arduino
Arduino Uno R3 Beginners Kit
- Great for Starting with Arduino Programming
- A variety of components are included in this pack to try out different projects.
- All-in-one kit, a great starter kit for learning to code.
- Microcontroller ATmega328 (SMD) – Interface CH340G
SKU: n/a -
Development Boards, Kits compatible with Arduino
Advanced Kit for Arduino
- All-in-one kit, a great starter kit for learning to code.
- Model Type: UNO Rev R3
- Microcontroller Chip: ATmega328
- Input Voltage(Recommended): 7-12V
- Operating Voltage: 5
- Analog I/O Pins: 6
- Digital I/O Pins: 14 (of which 6 provide PWM output)
SKU: n/a -
Boards Compatible with Arduino, Development Boards
Nano Board R3 with CH340 Chip Mini-USB Port compatible with Arduino (Unsoldered)
-15%
Boards Compatible with Arduino, Development BoardsNano Board R3 with CH340 Chip Mini-USB Port compatible with Arduino (Unsoldered)
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- Input Port: USB MINI
- Using Atmel Atmega328P-AU MCU
- Standard 0.1” spacing DIP (breadboard friendly).
SKU: n/a -
Boards Compatible with Arduino, Development Boards
Nano V3.0 CH340 Chip with Mini USB Cable Compatible with Arduino (Unsoldered)
-12%
Boards Compatible with Arduino, Development BoardsNano V3.0 CH340 Chip with Mini USB Cable Compatible with Arduino (Unsoldered)
- Operating Voltage (logic level): 5V
- With Mini USB
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
Boards Compatible with Arduino, Development Boards
Pro Mini ATMEGA328P 5V/16M (Official Version)
-19%
Boards Compatible with Arduino, Development BoardsPro Mini ATMEGA328P 5V/16M (Official Version)
- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
SKU: n/a -
Boards Compatible with Arduino, Development Boards
Nano CH340 Chip Board Without USB Cable Compatible with Arduino (Soldered)
-14%
Boards Compatible with Arduino, Development BoardsNano CH340 Chip Board Without USB Cable Compatible with Arduino (Soldered)
- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
Boards Compatible with Arduino, Development Boards
Pro Mini ATMEGA328P 5V/16M Blue – Standard Version
-16%
Boards Compatible with Arduino, Development BoardsPro Mini ATMEGA328P 5V/16M Blue – Standard Version
- Microcontroller: ATmega328P
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Use For Atmel Atmega328P-AU microcontroller.
- Support serial download.
- Support 9V battery.
- A pair of TTL level serial port transceiver : RX / TX.
SKU: n/a -
Boards Compatible with Arduino, Development Boards
Pro Mini ATMEGA328P 3.3V/8M (Official Version)
-18%
Boards Compatible with Arduino, Development BoardsPro Mini ATMEGA328P 3.3V/8M (Official Version)
- Microcontroller: ATmega328
- Circuit Operating Voltage: 3.3V
- Clock frequency: 8MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
SKU: n/a -
Boards Compatible with Arduino, Development Boards, ESP Boards and Accessories
Unsoldered Nano V3.0 ATmega328P 5V 16MHz CH340 Type-C
-17%
Boards Compatible with Arduino, Development Boards, ESP Boards and AccessoriesUnsoldered Nano V3.0 ATmega328P 5V 16MHz CH340 Type-C
- Model Name/Number Arduino NANO
- Memory 32 KB of Which 2 KB is Used By the Bootloader
- Processor ATmega328
- USB 2.0 Ports USB Type-C
- No. Of Cores Single
- Digital I/O Pin 22
- Weight 7g
SKU: n/a
