Shield for Arduino
Showing all 15 resultsSorted by popularity
-
-
Development Boards, Shield for Arduino
L293D Motor Driver/Servo Shield for Arduino
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
SKU: n/a -
Development Boards, Shield for Arduino
NANO IO Shield Expansion Board For Arduino Screw Terminals
-16%
Development Boards, Shield for ArduinoNANO IO Shield Expansion Board For Arduino Screw Terminals
- Compatible with Arduino NANO
- All digital and analog pins breakout
- Compact size.
- Leads all pins out, convenient for wiring and doing experiments.
- Dimensions: 53 x 36 x 12 (LxWxH) mm.
- Weight: 22 gm.
SKU: n/a -
Development Boards, Shield for Arduino
XBee Shield V03 Module Wireless Control
- Stackable design, easy to plug into the ARDUINO development board.
- Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.
- 3.3v and 5v dual power output.
- 3.3v and 5v IO compatible.
- USB2.0 protocol.
SKU: n/a -
-
-
Development Boards, Shield for Arduino
Proto Screw Shield 1.0 For Arduino Uno
- Arduino terminal to provide the IO, port connection.
- 3.81 posts quality, reliable, convenient, durable.
- Combined with the Proto Shield, the middle can be used as a prototype expansion board.
- Double-sided PCB Prototyping extended area vias connecting the front sides can be welded components.
- The middle section can be placed small bread plate, convenient test extend
SKU: n/a -
Development Boards, Shield for Arduino
VS1053 MP3 Recording Module Development Board with Onboard Recording Function
-16%
Development Boards, Shield for ArduinoVS1053 MP3 Recording Module Development Board with Onboard Recording Function
- SPI interface, the control signal lines are led out
- A headphone and stereo output
- Onboard Microphone for recording
- A line-in input interface
- Separate 3.5 mm Jack for MIC and Speaker
- Onboard Power Indicator
- 3.3V and 2.8V of LDO chip AMS-1117 on board provides up to 800mA current
SKU: n/a -
Development Boards, Shield for Arduino
Cytron G15 Shield
- Arduino reset button
- 4 x G15 Cube Servo ports.
- External power port for a servo with polarity protection
- Stackable I/O header pin
- Selectable digital pins for the control pin with mini jumpers
- TX and RX indicator LEDs to show communication activities, only on Rev2.0.
- Selectable Serial pins, Either hardware serial or software serial via mini jumpers, only on Rev2.0
SKU: n/a -
-
Development Boards, Shield for Arduino
ADK USB Host Shield compatible with Arduino
- Works with standard (dual 5/3.3V) and 3.3V-only (for example, Pro Arduino) boards.
- Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host)
- Supports HID devices, such as keyboards, mice, joysticks, etc.
- Compatible with Mass storage devices, such as USB sticks, memory card readers, external hard drives (FAT32 Type File System – Mega Arduino only).
SKU: n/a -
Development Boards, Shield for Arduino
SeeedStudio Grove Beginner Kit for Arduino
- Operating voltage: 5 V
- Tutorials for guidance
- Fully compatible with Arduino UNO
- High performance, low power 8 bit ATmega328 MU microcontroller
- Serial converter CP2102N chip (to communicate the Seeeduino with a computer by using a micro-USB cable)
- 2 on-board Grove connectors
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog inputs
- ISP header
- Arduino UNO-R3 shield compatible
- Micro USB programming and power supply
- Supports Windows, Mac OS, and Linux
SKU: n/a -
Development Boards, Shield for Arduino
SHIELD-EKG-EMG
- Stackable connectors – up to 6 channels can be stacked and wired to A0-A6 analogue inputs.
- Calibration signal generation by D4/D9 digital output
- Precise trimmer potentiometer for calibration (all boards are shipped completely assembled, tested and calibrated so that you don’t have to do this unless you want to see how things works)
- Input connector for standard or active electrodes.
- Works with both 3.3V and 5V Arduino boards
SKU: n/a
ACEBOTT QC027 Micro:bit Handle Kit Wireless Controller (without Micro:bit) 












