Raspberry Pi Hats
Showing 73–96 of 113 results
-
Raspberry Pi Hats
Stepper Motor HAT V2.0 Shield for Raspberry Pi Zero/3B+/4B
- Wide 5V to 12V Operating Voltage.
- Four Brushed DC Motor Bidirectional Control.
- Two Stepper Motor Control.
- Maximum Peak Current 3A
- PWM frequency up to 32KHz
- Support TTL PWM from the microcontroller
- Thermal Shutdown Protection
SKU: n/a -
-
Raspberry Pi Hats
Waveshare CM4 To Pi 4B Adapter for Raspberry Pi Alternative Solution for Raspberry Pi 4B, CM4 optional
-17%
Raspberry Pi HatsWaveshare CM4 To Pi 4B Adapter for Raspberry Pi Alternative Solution for Raspberry Pi 4B, CM4 optional
- Onboard 4-ch USB 3.0 ports, compatible with USB 2.0 / 1.1 transmission
- Onboard RJ45 Gigabit Ethernet port, 10 / 100 / 1000 M adaptive
- Onboard PoE header, for connecting PoE HATs
- DSI interface is DSI1
SKU: n/a -
Raspberry Pi Hats
Waveshare USB to Serial Port Expansion Board HUB
- 4 USB Ports, Compatible with USB2.0/1.1
- Onboard USB to UART, with enable/disable switch, convenient for Raspberry Pi serial debugging and avoiding conflict
- Onboard multi indicators, for monitoring the status of power, USB to UART, and each USB port
SKU: n/a -
-
Raspberry Pi Hats
Waveshare SX1262 LoRa HAT for Raspberry Pi 915MHz Frequency Band
- SX1262 LoRa module
- 74HC125V: voltage level translator
- CP2102: USB TO UART converter
- Working bands: 850.125 ~ 930.125MHz
- Receive Sensitivity: 147dBm@0.3Kbps (On-air)
- Interface: UART
- Range: 5KM(Sunny day; open area; Antenna: AUX 5dBi, Height 2.5m; Air Speed: 2.4kbps)
SKU: n/a -
Raspberry Pi Hats
LCD1602 RGB LCD HAT with Keypad For Raspberry PI
- Display construction: 16 Characters * 2 Lines
- Dimensions: 5.74cm × 8.24cm
- Comes with a 16×2 Blue & White LCD
- Plug and play with any Raspberry Pi
- Uses only the I2C (SDA/SCL) pins
- This board/chip uses I2C 7-bit address 0x20
- RBG backlight
- Pluggable LCD1602 module
SKU: n/a -
Raspberry Pi Hats
Waveshare Nano Base Board (B) for Raspberry Pi Compute Module 4, Same Size as the CM4
-9%
Raspberry Pi HatsWaveshare Nano Base Board (B) for Raspberry Pi Compute Module 4, Same Size as the CM4
- Power Input: 5V
- Connector: Raspberry Pi 40PIN GPIO interface × 1
- USB: USB 2.0 Type A interface × 1
- Camera: MIPI CSI-2 port × 1 (15pin 1.0mm FPC connector)
- Storage: Micro SD card socket for Compute Module 4 Lite (without eMMC) variants
SKU: n/a -
Raspberry Pi Hats
Waveshare USB 3.2 Gen1 And Gigabit Ethernet HUB HAT for Raspberry Pi 3x USB 1x Gigabit ETH Driver-Free
-17%
Raspberry Pi HatsWaveshare USB 3.2 Gen1 And Gigabit Ethernet HUB HAT for Raspberry Pi 3x USB 1x Gigabit ETH Driver-Free
- Driver-free, plug and play, compatible with OS including Windows, Mac OS, Linux, and Android
- Purpose-made for Raspberry Pi 4, compatible with other Raspberry Pi versions as well
- Comes with development resources and manual
SKU: n/a -
-
Raspberry Pi Hats
Waveshare 2-Channel Isolated CAN Expansion HAT for Raspberry Pi, Dual Chips Solution
-16%
Raspberry Pi HatsWaveshare 2-Channel Isolated CAN Expansion HAT for Raspberry Pi, Dual Chips Solution
- Brand: Waveshare
- CAN Bus Expansion HAT For Raspberry Pi
- Operating voltage: 5V
- Logic level: 3.
- Integrated power isolation
- Onboard 120Ω terminal resistor
- Adopts MCP2515 and SN65HVD230 dual chips combined solution,
- Breakout SPI control pins, for connecting with host control boards like STM32/Arduino
SKU: n/a -
Raspberry Pi Hats
Waveshare SIM7600G-H M.2 4G HAT for Raspberry Pi, LTE CAT4 High Speed, 4G/3G/2G, GNSS, Global Band
-10%
Raspberry Pi HatsWaveshare SIM7600G-H M.2 4G HAT for Raspberry Pi, LTE CAT4 High Speed, 4G/3G/2G, GNSS, Global Band
- LTE Cat-4: LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66 LTE-TDD: B34, B38, B39, B40, B41
- 3G: UMTS/HSDPA/HSPA+: B1, B2, B4, B5, B6, B8, B19
- 2G: GSM/GPRS/EDGE: 850, 900, 1800, 1900 MHz
- GNSS positioning: GPS, Beidou, Glonass, Galileo, QZSS, LBS base station
- USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 4G communication
SKU: n/a -
Raspberry Pi Hats
WIZnet W5100S-EVB-Pico
- RP2040 microcontroller with 2MByte Flash
- Dual-core cortex M0+ at up to 133MHz
- 264kByte multi-bank high-performance SRAM
- 30 multi-function General Purpose IO (4 can be used for ADC)
- 1.8-3.3V IO Voltage (NOTE. Pico IO voltage is fixed at 3.3V)
- 12-bit 500ksps Analogue to Digital Converter (ADC)
SKU: n/a -
Raspberry Pi Hats
Waveshare 3 Channel Relay HAT Smart Home for Raspberry Pi 3
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- High-quality relays, loads up to 5A 250V AC or 5A 30V DC
- Photo coupling isolation, prevent interference from high voltage circuit
- Onboard LEDs for indicating relays status
SKU: n/a -
-
-
Raspberry Pi Hats
Waveshare GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi
- Support GPS, COMPASS, Glonass, LBS Base Station Positioning, Omni-Positioning
- Bluetooth 3.0, Supports Data Transferring Through Bluetooth
- Onboard USB To UART Converter CP2102 for UART Debugging
- Compatible With Raspberry Pi Model Zero,3B/3B+,4
SKU: n/a -
Raspberry Pi Hats
Waveshare GPIO Expander For Raspberry Pi Pico, 1x Raspberry Pi Standard 40PIN, 1x Pico 2?20PIN
-12%
Raspberry Pi HatsWaveshare GPIO Expander For Raspberry Pi Pico, 1x Raspberry Pi Standard 40PIN, 1x Pico 2?20PIN
- Center female pin header for direct attaching the Raspberry Pi Pico.
- Extra USB connector for external power supply.
- Immersion Gold Process
- Black Base Panel, White Pinout Labels, Golden Rounded Outline, Stunning Aesthetic
SKU: n/a -
Raspberry Pi Hats
Waveshare SX1262 LoRa HAT for Raspberry Pi 868MHz Frequency Band
- SX1262 LoRa module
- 74HC125V: voltage level translator
- CP2102: USB TO UART converter
- Working bands: 850.125 ~ 930.125MHz
- Receive Sensitivity: 147dBm@0.3Kbps (On-air)
- Interface: UART
- Range: 5KM(Sunny day; open area; Antenna: AUX 5dBi, Height 2.5m; Air Speed: 2.4kbps)
SKU: n/a -
Raspberry Pi Hats
Waveshare SX1268 LoRa HAT for Raspberry Pi 433MHz Frequency Band
- SX1268 LoRa module
- 74HC125V: voltage level translator
- CP2102: USB TO UART converter
- Working bands: 410.125 ~ 493.125MHz
- Receive Sensitivity: 147dBm@0.3Kbps (On-air)
- Interface: UART
- Range: 5KM(Sunny day; open area; Antenna: AUX 5dBi, Height 2.5m; Air Speed: 2.4kbps)
SKU: n/a
