Development Board
Showing 1–24 of 28 resultsSorted by popularity
-
Development Boards, Kits compatible with Arduino
Arduino Uno R3 Beginners Kit
- Great for Starting with Arduino Programming
- A variety of components are included in this pack to try out different projects.
- All-in-one kit, a great starter kit for learning to code.
- Microcontroller ATmega328 (SMD) – Interface CH340G
SKU: n/a -
ESP WIFI Modules
ESP8266 NodeMCU CP2102 Board
- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- Arduino-like hardware IO
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
SKU: n/a -
ESP WIFI Modules
NodeMCU ESP8266 Serial Port Baseboard Lua WIFI Development Board
- The perfect solution for breaking out the pins from Lua V3 Nodemcu.
- Lead-out all the IO ports of the ESP-12E development board
- Lead out the pins of 5V and 3.3V power supply
- Convenient to connect with peripheral modules
- Onboard 5V / 1A DC-DC step-down converter circuit
- Onboard power indicator
- With DC power jack 6-24V.
SKU: n/a -
Development Boards, Single Board Computer, Udoo Board
Udoo Neo Basic Development Board
- NXP i.MX 6SoloX applications processor with an embedded ARM Cortex-A9 core and a Cortex-M4 Core
- Integrated 2d/3d graphics controller
- Micro HDMI interface – LVDS interface + touch (I2C signals)
- Analogue camera connection supporting NTSC and PAL – 8-bit parallel camera interface
- MicroSD card slot onboard – 8-bit SDIO interface
- HDMI audio transmitter – S/PIDF & I2S
- Green Power Status LED – User Configurable LEDs (Red and Orange)
- Arduino-Compatible through the standard Arduino Pins layout and compatible with Arduino shields
SKU: n/a -
Arduino Compatible borads and Accesories, Development Boards
PIC K150 USB Automatic Develop Microcontroller Programmer with ICSP Cable (Body width: 4 mm)
-10%
Arduino Compatible borads and Accesories, Development BoardsPIC K150 USB Automatic Develop Microcontroller Programmer with ICSP Cable (Body width: 4 mm)
- Support the most popular programming PIC chips, read, encryption and other features!
- No external power supply, communication, and power is only a USB cable to print complete, without any cable.
- PICSTARTPLUS much faster rate than programming.
- Can easily read the contents of the chip program area.
- Automatic programming verification.
- Comprehensive information prompts, allowing users to understand the working state.
SKU: n/a -
Arduino Compatible borads and Accesories, Development Boards
PICkit3 Debugger Programmer Emulator Controller Development Board
-3%
Arduino Compatible borads and Accesories, Development BoardsPICkit3 Debugger Programmer Emulator Controller Development Board
- Full-speed USB support using Windows standard drivers
- Real-time execution
- Processors run at maximum speeds
- Built-in over-voltage/short circuit monitor
- Low voltage to 5V (1.8 to the 5V range)
- Read/write program and data memory of the microcontroller
- Program up to 512K byte flash.
SKU: n/a -
ARM Microcontroller
Core Board STM8S103F3P6 STM8 Development Board Minimum System Board
- Chipboard STM32F103C8T6
- On board, SWIM interface and reset button
- Micro USB line or the 2.54 pin to link to the power with the input voltage 4.5V-15V.
- Power light and the Demo indicator light
- Leads all the pins and has detailed label for the Pins.
- Support SWIM debug mode.
SKU: n/a -
Advance Development Boards, Development Boards
BIGTREETECH BTT CB1 Development Board
- CPU :Allwinner H616, quad core Cortex-A53
- GPU :Mali G31 MP2, also supports OPENGL3.2
- RAM : 1GB DDR3L SDRAM
- Screen : supports HDMI2.0A, 4K display
- Interface :USB2.0
- Network Connection :100M Ethernet + 100M WiFi
SKU: n/a -
Development Boards, Kits compatible with Arduino
Uno Learning kit for Arduino
- All-in-one kit, a great starter kit for learning coding.
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
Development Boards, Kits compatible with Arduino
Advanced Kit for Arduino
- All-in-one kit, a great starter kit for learning to code.
- Model Type: UNO Rev R3
- Microcontroller Chip: ATmega328
- Input Voltage(Recommended): 7-12V
- Operating Voltage: 5
- Analog I/O Pins: 6
- Digital I/O Pins: 14 (of which 6 provide PWM output)
SKU: n/a -
Development Boards
UNO R3 CH340G ATMega328P compatible with arduino + Cable + Transparent Acrylic Case For Uno R3
-15%
Development BoardsUNO R3 CH340G ATMega328P compatible with arduino + Cable + Transparent Acrylic Case For Uno R3
- A basic Arduino Kit including everything to get started.
- It includes a quality proven Arduino Cable.
- It includes a strong and sturdy Transparent Acrylic Case.
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
Development Boards
Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino
- ATMEGA32U4 running in 5V / 16MHz
- Support Arduino IDE V1.0.1
- Micro USB interface programming on the board
- Four 10-bit ADC pin
- 12 digital I / O (5 PWM capability)
- Rx and Tx hardware serial connection
SKU: n/a -
-
-
Development Boards
Uno R3 compatible with Arduino + Cable + Transparent acrylic case for Uno R3
- A basic Arduino Kit including everything to get started.
- It includes a quality proven Arduino Cable.
- It includes a strong and sturdy Transparent Acrylic Case.
- Micro-controller : ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended) : 7-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: n/a -
Development Boards
LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
SKU: n/a -
Development Boards
Adafruit Feather M4 Express – Featuring ATSAMD51 – ATSAMD51 Cortex M4
- ATSAMD51 32-bit Cortex M4 core
- 512 KB flash, 192 KB RAM
- 3.3V regulator with 500mA peak current regulator
- USB bootloader and serial port debugging
- Built-in 100mA lipoly charger with charging status indicator LED
SKU: n/a -
Arduino Compatible borads and Accesories, Development Boards
Altera MAX II EPM240 CPLD Development Board
-16%
Arduino Compatible borads and Accesories, Development BoardsAltera MAX II EPM240 CPLD Development Board
- Onboard the EPM240T100C5N chip.
- EPROM chip configuration using EPCS4, the size of 8Kbit.
- Onboard 50M active patch crystal (Crystal Slaughter halfback).
- Power supply with a largemouth outlet, single 5V power supply.
- Board has a power indicator and reset switch.
- More IO ports and clock pins through the pin leads through these interfaces can be extended to any memory and peripherals.
SKU: n/a -
Arduino Single Boards Computer
Mega2560 Pro ATMEGA2560-16U USB CH340G Development Board
- The board is compatible with Mega 2560.
- Excellent solution for developing projects based on ATmega2560.
- The board can be powered directly through the Micro USB connector
- The maximum output current upon 5V is around 800mA, while on the 3.3V it is about 800mA.
SKU: n/a -
AVR Microcontroller Board
ATTINY85 USB Development Board
- The Onboard, 150 ma 5 v Regulator.
- 8 k Flash Memory (about 6k after bootloader).
- The I2C and SPI (vis USI).
- The Power LED and the Test/Status LEDs.
- Built-in USB and serial were debugging).
- Support for the Arduino IDE 1.0 + (OSX/Windows/Linux)
SKU: n/a -
-
BIGTREETECH BTT CB1 Development Board
Acrylic Adjustable Camera Mount Module for Raspberry Pi
Sonoff Micro 5V Wireless USB Smart Adaptor
Official Arduino Portenta H7 Lite Connected Edge AI Board ABX00046
X2 ELF 88MM Micro brushless racing kit
BIGTREETECH BTT Pi4B Adapter Board
Auto-Calibrating Line Sensor LSS05
BGC v3.15 MOS Large Current 2-axis Brushless Gimbal Controller Driver
Arduino Uno R3 Beginners Kit 

















