Flight Controller & Accessories
Showing all 16 resultsSorted by popularity
-
Drone, Flight Controller & Accessories
Naze 32 Full REV6 Flight Controller with Compass & Barometer
-5%
Drone, Flight Controller & AccessoriesNaze 32 Full REV6 Flight Controller with Compass & Barometer
- 2000 degrees/second 3-axis MEMS gyro + accelerometer (MPU6500).
- Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line.
- Fully pinout compatible with rev5 accessories (OSDoge etc).
- SBUS Inverter.
- Sonar pads w/resistors added for direct connection to 5V sonar.
- MS5611 barometer.
- 128mbit flash.
SKU: n/a -
Drone, Flight Controller & Accessories
F3 EVO V2.0 Flight Control
- Supported Receiver Input Signal: PPM, SBUS, DSM
- Support PPM, SBUS, DSM receiver input signal
- Battery voltage detection and buzzer interface
- Large current NMOS transistors, operating current can reach 10A or higher
- Use STM32F303CCT6 + MPU6500, advanced hardware platform F3 for higher flight stability
SKU: n/a -
Drone, Flight Controller & Accessories
OpenPilot CC3D EVO Flight Controller Straight Pin
- 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
- Tiny 36 x 36 mm 4 layer PCB for superior electrical noise reduction and flight performance.
- Software support for Windows, Mac, and Linux.
- Direct high-speed USB support with no drivers required, a true plug and play device.
- Spektrum satellite receiver support.
- Futaba S-BUS hardware support.
- Innovative Flexi-port technology for superior port flexibility.
- 4Mbits onboard EEPROM for configuration storage.
SKU: n/a -
Drone, Flight Controller & Accessories
SP Racing F3 Flight Controller Integrate OSD ACRO Version
-10%
Drone, Flight Controller & AccessoriesSP Racing F3 Flight Controller Integrate OSD ACRO Version
- STM32F303 CPU, 72Mhz inc FPU
- CPU: STM32F303, 72Mhz inc FPU
- Acro: High-Capacity Flash
- Accelerometer/gyro: MPU6050
- Board size: 36 x 36 x 5mm (without shell)
- Board weight: 5.9g
- Weight: 22 gm(with all accessories)
SKU: n/a -
Drone, Flight Controller & Accessories
Holybro Original Pixhawk PX4 Flight Controller (without GPS)
- Main FMU Processor: STM32F76
- 32 bit ARM® Cortex® M7, 216 MHz Processor running NuttX RTOS,
- More computing power and 2X the RAM than previous versions)
- Abundant connectivity options for additional peripherals (UART, I2C, CAN)
- Redundant power supply inputs and automatic failover
- External safety button for easy motor activation
- New sensors with higher temperature stability
- Multicolor LED indicator
- Integrated vibrations isolation
- High-power, multi-tone piezo audio indicator
- microSD card for long-time high-rate logging
SKU: n/a -
-
Drone, Flight Controller & Accessories
Micro Minim OSD For Racing F3 Naze32 Flight Controller RC Drone
-12%
Drone, Flight Controller & AccessoriesMicro Minim OSD For Racing F3 Naze32 Flight Controller RC Drone
- ATmega328P with Arduino bootloader.
- MAX7456 monochrome on-screen display.
- +5V 500mA regulator for up to +12V supply input.
- FTDI cable compatible pinout.
- The standard 6-pin ISP header.
- Standalone, or with APM/ Flip / Flip32+ flight controllers.
SKU: n/a -
Drone, Flight Controller & Accessories
SP Racing F3 Flight Controller Deluxe
- Stackable design – perfect for integrating with OSDs and power distribution boards.
- 16 PWM I/O lines for ESCs, Servos and legacy receivers. 8 available on standard pin headers. 8 via side mounted connectors.
- Full support for OneShot ESCs for easy PID tuning and a sharper response.
- Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers.
- No external inverters required (built-in).
- Dedicated output for programmable LEDs – great for orientation, racing and night flying.
- Dedicated I2C port for connection of OLED display without needing flight battery.
- Battery monitoring ports for voltage and current.
- Sonar support for precision low-altitude hold.
- Buzzer port for audible warnings and notifications.
- Symmetrical design for a super tidy wiring.
- Barometer mounted on the bottom of the board for easy wind isolation.
- Wire up using pin headers, JST-SH sockets or solder pads. Use either right-angled or straight pin-headers.
SKU: n/a -
Drone Kit, Flight Controller & Accessories
F4 Pro V2 V3.5 v3s Flight Control Built-in OSD / BEC
- Product: Flight Controller
- SPI Gyro IC268G
- On-Board OSD (controllered by Betaflight, FC over SPI bus)
- MicroSD Blackbox
- Baro (BMP280)( default is closed,need to open in configuration,if not know how to open,contact with us)
SKU: n/a -
-
Drone, Flight Controller & Accessories
SP RACING F3 FC Replacement Accessories Set
Accessories compatible with SP RACING F3 Flight Controller Module
High-quality cable and connectors.
1 x 3*8 Burg connector(Straight)
1 x 3*8 Burg connector(Right-angle)
1 x 1*10 Burg Connector(Straight)
2 x 2pt cable
2 x 4pt cable
2 x 8pt cableSKU: n/a -
Drone, Flight Controller & Accessories
Pixhawk I2C Port Expand Board with Cable
- Package Weight: 5 gm
- Number of Ports: 5.
- Board Dimensions: 33 x 12 x 6 mm(LxWxH)
- Net Weight: 3g
- Brand new and high quality
- The I2C splitter expands the I2C port to allow up to four additional peripherals to connect to Pixhawk.
SKU: n/a
OpenPilot CC3D EVO Flight Controller Straight Pin
LoRa module RFM95W-868S2R
Raspberry Pi 4 Model-B with 4 GB RAM
MARTIAN-II REPTILE 220mm Quadcopter Frame Kit
Q250 4 Axis Quadcopter Frame Kit
Q250 Quadcopter Strong Carbon Fiber 3mm Arm FPV Racing Frame(250mm) Kit
SP RACING F3 FC Replacement Accessories Set
SP Racing F3 Flight Controller Deluxe
APM 2.8 Upgraded Flight Controller kit with GPS Module Combo Kit
Pixhawk PX4 2.4.7 32Bits Flight Controller for Quadcopter Multicopter 








