Naze 32 Full REV6 Flight Controller with Compass & Barometer is the newest version, rev6, of the popular Full Naze32 flight controller board by Abuse Mark Made in JAPAN. At the heart of the Naze32 are a 32bit ST micro workhorse of a processor, with untapped memory and CPU power and a host of equally impressive sensors. The Naze is also matched up with some of the nicest GUI programs. Also features to get the most out of your configuration.
This is an amazing flight controller for a multirotor. This “Full” version is the same as the Acro Naze32 board except the full version comes with the featured MS5611 barometer and a magnetometer which is a step up from the acro version. You should use this flight controller if you want to use GPS options such as return to home, hold, speed indication via telemetry or OSD, And Coordinates, RTH arrow, heading and altitude information in an On-Screen Display.
All the revision 6 boards include a built-in black box flight data recorder which is great. The 6 DOF, Acro, and 10 DOF naze boards have 16Mbit onboard SPI flash. However, the Full version includes 128Mbit onboard SPI flash so this just means you can store more flight logs on your full board. These come with pin headers (straight and right angle options), NOT soldered to the board.
Note: NAZE boards can vary in color from batch to batch, a random color will be shipped as per the availability.
Warning: There is no reverse voltage polarity protection built into this board, so if you connect your power backward you will instantly destroy the hardware.
Specification:
| Input Voltage (V) | 5 VDC |
|---|---|
| Sensors | 3-Axis Gyrometer, Accelerometer, Compass & Barometer |
| Processor | MPU6050, STM32 F103 |
| Micro-SD Card Slot | Yes |
| Dimensions (mm) LxWxH | 36 x 36 x 7 |
| Weight (gm) | 10 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 6 × 4 × 1 cm |
Features:
- 2000 degrees/second 3-axis MEMS gyro + accelerometer (MPU6500)
- Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line
- USB on right side
- PPM/PWM input as through-hole
- 3.3V, I2C on standard-size headers
- Fully pinout compatible with rev5 accessories (OSDoge etc)
- SBUS Inverter
- Spectrum satellite
- Sonar pads w/resistors added for direct connection to 5V sonar
- All extra pads (FT, GP, A5) on top, only sonar on bottom
- MS5611 barometer
- 128mbit flash
Package Includes:
1 x Naze 32 Full REV6 Flight Controller board
1 x 3*6 Pin Header (Right angle)
1 x 2*5 Pin Header (Right angle)
1 x 3*6 Pin Header (Straight)
1 x 1*10 Pin Header (Right angle)
1 x 1*10 Pin Header (Straight)
1 x 2*5 Pin Header (Straight)
1 x Connecting Cable
1 x Plastic Case
ESC Power Distribution Board Soldered XT60 Plug & 3.5mm Banana Bullet Connectors For 250mm Multicopter FPV
EMAX MT2216 810KV Brushless DC Motor ? Black Cap (CW Motor Rotation) with Prop1045 Combo (Original)
Skyzone Cobra Lite V2 FPV Goggles
QX95 Quad-copter Combo Kit
ACEBOTT QE032 TruckBott Smart Car Kit with ESP32 Controller Supports Arduino, ACECode & Python | STEM Classroom & Home Education
Ready to Sky Plastic Landing Gear for Quadcopter
reComputer Industrial J4012- Fanless Edge AI Device with Jetson Orin™ NX 16GB module, Aluminum case with passive cooling
Adafruit Feather M4 Express – Featuring ATSAMD51 – ATSAMD51 Cortex M4
ACEBOTT QE027 ESP32 Intelligent Transportation STEM Kit Compatible with Arduino
ARF Quadcopter Advanced Combo Kit
Uno R3 CH340G ATmega328p Development Board Arduino
NodeMCU CP2102 Board ESP8266
F450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA
APM 2.8 Upgraded Flight Controller kit with GPS Module Combo Kit
QX 95 Quad-Copter Combo kit with Radiolink flight controller 










There are no reviews yet.