SLAMTEC RPLiDAR C1M1-R2 Portable ToF Laser Scanner Kit – 12M Range Subtotal: ₹8,999.00
Recommended Products
AI Roboo Kits, AI, Robotics & DIY Kits, IoT & Wireless, IoT Development Boards
AI Roboo Advanced Robotics Kit – Multi-Function
-29% 
AI Roboo Kits, AI, Robotics & DIY Kits, IoT & Wireless, IoT Development Boards
AI Roboo Advanced Robotics Kit – Multi-Function
A versatile robotics kit designed for building multi-function robots.
Includes sensors, actuators, and controllers for advanced robotics learning.
Ideal for students, hobbyists, and developers exploring autonomous systems.
Supports various robotics projects like obstacle avoidance, line following, and automation.
Perfect for hands-on STEM education and innovative prototype development.
SKU: n/a
AI Roboo Kits, AI, Robotics & DIY Kits, IoT & Wireless, IoT Development Boards
AI Roboo Medical Kit (Healthcare Sensors)
-25% 
AI Roboo Kits, AI, Robotics & DIY Kits, IoT & Wireless, IoT Development Boards
AI Roboo Medical Kit (Healthcare Sensors)
ESP32 microcontroller with Wi-Fi & Bluetooth
Heart rate & oximeter, ECG, EMG, GSR, IR temperature, CO2, BP-ready sensors
RGB LED, buzzer, and potentiometer for interactive control
Hands-on learning for students, hobbyists, and medical tech enthusiasts
Expandable for custom healthcare IoT projects
SKU: n/a
AI Roboo Kits, AI, Robotics & DIY Kits, IoT & Wireless, IoT Development Boards
AI Roboo Lite Kit – Multi-Sensor
-26% 
AI Roboo Kits, AI, Robotics & DIY Kits, IoT & Wireless, IoT Development Boards
AI Roboo Lite Kit – Multi-Sensor
Multi-microcontroller: ESP32 & Raspberry Pi Pico
RGB LED, push buttons, relays, buzzer, seven-segment & OLED display
Sensors: Accelerometer, Temp & Humidity, Barometric Pressure, Ultrasonic, Gas, Touch, LDR, IR, Air Quality
Beginner-friendly for hands-on IoT learning
Expandable via GPIO pins
SKU: n/a
AI Roboo Kits, AI, Robotics & DIY Kits, IoT & Wireless, IoT Development Boards
AI Roboo Experience Kit – Multi-Controller
-20% 
AI Roboo Kits, AI, Robotics & DIY Kits, IoT & Wireless, IoT Development Boards
AI Roboo Experience Kit – Multi-Controller
Complete starter kit for building IoT projects
Includes sensors, connectivity modules, and development tools
Enables fast prototyping and testing of smart devices
Ideal for students, hobbyists, and professionals
Easy to use with support for popular IoT platforms with AI Roboo Kit.
SKU: n/a
RASPBERRY PI, Raspberry PI Compatible Kits
Combo of Raspberry Pi 4 Model-B with 1 GB RAM + Micro-HDMI Cable + Micro-USB to C type Converter
-11% 
RASPBERRY PI, Raspberry PI Compatible Kits
Combo of Raspberry Pi 4 Model-B with 1 GB RAM + Micro-HDMI Cable + Micro-USB to C type Converter
1. To complement the new upgrade on the Pi, consider acquiring two additional accessories:
– Micro-HDMI cable
– Micro-USB to Type-C converter
2. We have conveniently bundled these essential products to meet the requirements of the upgraded hardware in the Raspberry Pi 4. Obtain everything you need in one comprehensive package to kickstart your journey with the latest Raspberry Pi 4 Model B.
SKU: n/a
Shop
Showing 1105–1128 of 2420 resultsSorted by popularity
-
Gas and Dust Sensor
MQ-4 High Sensitivity Gas Methane (CNG) Detector Sensor Module
- Detecting range: 300~10000ppm
- Signal output indicator.
- Dual Signal output (analog output and TTL output).
- The TTL output signal is low level, allows us to connect with SCM directly.
- Analog output 0~5V voltage.
- Quick response and recovery.
SKU: n/a -
Gas and Dust Sensor
MQ-3 Alcohol Detector Gas Sensor Module
- Power requirements: 5 VDC @ ~165 mA (heater on) / ~60 mA (heater off).
- Current Consumption: 150mA.
- DO output: 0.1 and 5V.
- AO output: 0.1- 0.3 V (relative to pollution), the maximum concentration of a voltage of about 4V
- Detecting Concentration: 0.05-10mg/L Alcohol.
SKU: n/a -
Gas and Dust Sensor
MQ-7 CO Carbon Monoxide Coal Gas Sensor Module
- Operating voltage: DC 5 V.
- The analog output voltage, the higher the concentration the higher the voltage.
- The carbon monoxide detection with better sensitivity.
- With a long service life and reliable stability.
- Rapid response and recovery characteristics.
- Range: 10 to 1000 ppm.
SKU: n/a -
Gas and Dust Sensor
MQ 135 Air Quality/Gas Detector Sensor Module For Arduino
- Sensitivity to Ammonia, Sulphide and Benzene steam
- Sensitive for benzene, alcohol, smoke
- Fast response and recovery
- Adjustable sensitivity
- Signal output indicator
- Output voltage boosts along with the concentration of the measured gases increases.
SKU: n/a -
-
-
Proximity Sensor
Tube Type Inductive Proximity Sensor Detection Switch NPN DC6-36V 4mm Normally Open switch LJ12A3-4-Z/BX
-28%
Proximity SensorTube Type Inductive Proximity Sensor Detection Switch NPN DC6-36V 4mm Normally Open switch LJ12A3-4-Z/BX
- Output Type: NPN-NO
- Red LED checks the state of the proximity sensor
- High repeated positioning accuracy
- High switching frequency
- Wide voltage range
- Antivibration, dust, water and oil prevention
- Reverse power protection, short circuit protection, directly connecting with PLC
- Can replace small switches and limit switches
SKU: n/a -
-
-
Proximity Sensor
DC 6-36V M17 Inductive 8mm NPN-NO Proximity Sensor Switch
- Operating Voltage: DC 6-36V.
- Output Type: NPN Normally Open Three-line.
- Detection object: Metal Objects.
- Detection distance (mm): 1 – 4.
- Output Current: 300 mA.
- Cable Length: Approx 1.1 m.
- Mounting thread diameter: 12 mm.
SKU: n/a -
-
-
-
-
LiDAR Sensor
SLAMTEC RPLiDAR A1M8 360 Degree Laser Range Finder – 6m (Radius Range)
- Distance Range (Radius): 0.15m to 6m, white objects (Diameter Range – 12m)
- Angular Range: 0 ~ 360º
- Distance Resolution: < 0.5mm
- Angular Resolution: <= 1 º
- Sample Duration: 0.5 ms
- Sample Frequency: >=8000 Hz
- Scan Rate: 1 ~ 10Hz, Typical 5.5Hz
SKU: n/a -
-
LiDAR Sensor
Benewake TF03 100m RS485/RS232 Industrial High-Speed Lidar
- RS485/RS232 version
- Long Range: 100m@90% reflectivity, 40m@10% reflectivity
- Multi echo: 4 times
- Ambient Light Resistance: 100Klux
- Multi-interface compatibility, able to be used in many fields
- IP67 high-strength bodywork and high reliability
SKU: n/a -
LiDAR Sensor
SLAMTEC Slamtec RPLiDAR A2M12 360 Degree Laser Scanner Kit – 12M Range
- Scanning Range: 18M Radius
- Detection Range: 12M Radius
- 4cm Ultra-thin
- Ideal for all kinds of service robots.
- 16000 times the sample rate, the highest in the current economical LIDAR industry
- 360-degree laser range scanning
- Low Noise, Brushless Motor New Non-contact Drive
- OPTMAG Original Design, prolong the lifespan
- Class 1 Laser Safety Standard
- High-speed RPVision Range Engine: RPVision 2.0
- Five years ultra-long life.
SKU: n/a
