Arduino Nano
Showing all 12 resultsSorted by popularity
-
Development Boards, Shield for Arduino
NANO IO Shield Expansion Board For Arduino Screw Terminals
-16%
Development Boards, Shield for ArduinoNANO IO Shield Expansion Board For Arduino Screw Terminals
- Compatible with Arduino NANO
- All digital and analog pins breakout
- Compact size.
- Leads all pins out, convenient for wiring and doing experiments.
- Dimensions: 53 x 36 x 12 (LxWxH) mm.
- Weight: 22 gm.
SKU: n/a -
-
Development Boards
Nano V3.0 CH340 Chip with Mini USB Cable Compatible with Arduino (Unsoldered)
-12%
Development BoardsNano V3.0 CH340 Chip with Mini USB Cable Compatible with Arduino (Unsoldered)
- Operating Voltage (logic level): 5V
- With Mini USB
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
Development Boards
Nano CH340 Chip Board Without USB Cable Compatible with Arduino (Soldered)
- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
Development Boards
Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
Development Boards
Nano R3 W/O USB Cable Compatible with Arduino (Soldered)
- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel MEGA328PB-U (Nano)
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
Development Boards
Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino
- ATMEGA32U4 running in 5V / 16MHz
- Support Arduino IDE V1.0.1
- Micro USB interface programming on the board
- Four 10-bit ADC pin
- 12 digital I / O (5 PWM capability)
- Rx and Tx hardware serial connection
SKU: n/a -
Official Arduino Boards
Nano Board R3 with CH340 Chip without USB Cable Compatible with Arduino (Unsoldered)
-6%
Official Arduino BoardsNano Board R3 with CH340 Chip without USB Cable Compatible with Arduino (Unsoldered)
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- Standard 0.1” spacing DIP (breadboard friendly).
SKU: n/a -
Arduino Single Boards Computer, Development Boards
Arduino Nano Board R3 with CH340 chip (Unsoldered)
-44%
Arduino Single Boards Computer, Development BoardsArduino Nano Board R3 with CH340 chip (Unsoldered)
The Arduino Nano Board R3 with CH340 is another popular Arduino development board very much similar to the Arduino UNO They use the same Processor (Atmega328p) and hence they both can share the same program.
SKU: n/a -
Arduino Single Boards Computer, Development Boards
Arduino Nano Board R3 with CH340 chip (soldered pin)
-22%
Arduino Single Boards Computer, Development BoardsArduino Nano Board R3 with CH340 chip (soldered pin)
- The Arduino Nano Board R3 with CH340 is another popular Arduino development board very much similar to the Arduino UNO They use the same Processor (Atmega328p) and hence they both can share the same program.
SKU: n/a -
Official Arduino Boards, Official Arduino Pro and Cloud Boards
Original Arduino Nano A000005
- Manufacturer: Arduino Officials
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a
ESP32 OLED Module for WiFi and Bluetooth
Official USB type-C 15.3W Power Supply For Raspberry Pi 4
Seeed studio re_computer case: BeagleBone and Jetson Nano/Xavier NX
HDMI Male to VGA Female Adapter with 3.5mm AUX and USB to MicroUSB Power Cables
QX 95 Quad-Copter Combo kit with Radiolink flight controller
reComputer Jetson-20-1-H2 with Jetson Xavier NX module, Aluminium Case, Pre-Installed JetPack System (Without Adapter)
QX95 Quad-copter Combo Kit
2-Wheel Drive Rugged Robot Chassis with 37mm 37B280 Gear Motor
ACEBOTT ESP32 Smart Farm IoT Starter Kit with Arduino IDE/ACECode(Scratch) - QE002
ARF Quadcopter Economy Combo Kit
HDMI Male to VGA Female Converter Adapter 1080P For PC, Rspberry Pi
Mini Self-Balancing 2WD Robot Chassis with N20 Encoder Motors
Q100 Brushed Quad-copter Frame
ARF Quadcopter Upgraded Combo Kit
F450 / Q450 Quadcopter Frame(PCB Version with Integrated PCB) + Plastic Landing Gear Combo Kit – Made in INDIA
IX2 90mm Micro FPV Racing kit
Raspberry Pi Official Mini HDMI C/M to Standard HDMI A/F Cable 10CM White
NVIDIA Jetson Xavier NX Module
X2 ELF 88MM Micro brushless racing kit
Nano Board R3 with CH340 Chip Mini-USB Port compatible with Arduino (Unsoldered) 





