Arduino Nano
Showing all 12 resultsSorted by popularity
-
Development Boards, Shield for Arduino
NANO IO Shield Expansion Board For Arduino Screw Terminals
-16%
Development Boards, Shield for ArduinoNANO IO Shield Expansion Board For Arduino Screw Terminals
- Compatible with Arduino NANO
- All digital and analog pins breakout
- Compact size.
- Leads all pins out, convenient for wiring and doing experiments.
- Dimensions: 53 x 36 x 12 (LxWxH) mm.
- Weight: 22 gm.
SKU: n/a -
-
Development Boards
Nano V3.0 CH340 Chip with Mini USB Cable Compatible with Arduino (Unsoldered)
-12%
Development BoardsNano V3.0 CH340 Chip with Mini USB Cable Compatible with Arduino (Unsoldered)
- Operating Voltage (logic level): 5V
- With Mini USB
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
Development Boards
Nano CH340 Chip Board Without USB Cable Compatible with Arduino (Soldered)
- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
Development Boards
Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
Development Boards
Nano R3 W/O USB Cable Compatible with Arduino (Soldered)
- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel MEGA328PB-U (Nano)
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
Development Boards
Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino
- ATMEGA32U4 running in 5V / 16MHz
- Support Arduino IDE V1.0.1
- Micro USB interface programming on the board
- Four 10-bit ADC pin
- 12 digital I / O (5 PWM capability)
- Rx and Tx hardware serial connection
SKU: n/a -
Official Arduino Boards
Nano Board R3 with CH340 Chip without USB Cable Compatible with Arduino (Unsoldered)
-6%
Official Arduino BoardsNano Board R3 with CH340 Chip without USB Cable Compatible with Arduino (Unsoldered)
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- Standard 0.1” spacing DIP (breadboard friendly).
SKU: n/a -
Arduino Single Boards Computer, Development Boards
Arduino Nano Board R3 with CH340 chip (Unsoldered)
-44%
Arduino Single Boards Computer, Development BoardsArduino Nano Board R3 with CH340 chip (Unsoldered)
The Arduino Nano Board R3 with CH340 is another popular Arduino development board very much similar to the Arduino UNO They use the same Processor (Atmega328p) and hence they both can share the same program.
SKU: n/a -
Arduino Single Boards Computer, Development Boards
Arduino Nano Board R3 with CH340 chip (soldered pin)
-22%
Arduino Single Boards Computer, Development BoardsArduino Nano Board R3 with CH340 chip (soldered pin)
- The Arduino Nano Board R3 with CH340 is another popular Arduino development board very much similar to the Arduino UNO They use the same Processor (Atmega328p) and hence they both can share the same program.
SKU: n/a -
Official Arduino Boards, Official Arduino Pro and Cloud Boards
Original Arduino Nano A000005
- Manufacturer: Arduino Officials
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a
Raspberry PI POE+ Hat for 3B+ and Pi 4
Raspberry Pi Camera Module 3
ODYSSEY – STM32MP157C Raspberry Pi 40-Pin Compatible with SoM
ACEBOTT - QD109 Battle Arena Kit For Battle Car
reComputer J4012-Edge Al Device with Jetson Orin™™ NX 16GB module, 4xUSB 3.2, Μ.2 Key E & Key M Slot, Aluminum case, Pre-installed JetPack System on 128GB NVMe SSD (Without Adapter)
Argon Fan HAT for Raspberry Pi 4, 3B,3 B+, Includes 40mm Fan
1/4 Cmos 640X480 USB Camera with Collapsible Cable for Raspberry Pi
Readytosky 80A ESC 2-6S Brushless ESC Speed Controller for RC Drone
Waveshare CAN bus Module (B) for Raspberry Pi Pico, enabling long range communication through SPI
Pixhawk 2.4.7 Upgraded Flight Controller kit with GPS Module Combo Kit
Waveshare ESP32-S3 Mini Development Board, Based on ESP32-S3FH4R2 Dual-Core Processor, 240MHz Running Frequency, 2.4GHz Wi-Fi & Bluetooth 5
Official Micro-HDMI (Male) to Standard HDMI (Male) Cable for Raspberry Pi
A205E Mini PC, With Jetson Xavier NX 8GB Module 






